KC5HWB-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object KC5HWB-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RFIn*	RFiGate*	DigiRpt*	Temp*	InetiGate*
1789951811	236 Pkts	234 Pkts	83 Pkts	31 C	0 Pkts
1789948211	158 Pkts	156 Pkts	57 Pkts	31 C	0 Pkts
1789944611	163 Pkts	163 Pkts	64 Pkts	32 C	0 Pkts
1789941011	181 Pkts	176 Pkts	74 Pkts	32 C	0 Pkts
1789937411	210 Pkts	208 Pkts	71 Pkts	32 C	0 Pkts
1789933811	252 Pkts	251 Pkts	95 Pkts	32 C	0 Pkts
1789930211	180 Pkts	178 Pkts	57 Pkts	31 C	0 Pkts
1789926610	127 Pkts	125 Pkts	48 Pkts	30 C	0 Pkts
1789923010	196 Pkts	194 Pkts	47 Pkts	29 C	0 Pkts
1789919411	211 Pkts	209 Pkts	91 Pkts	27 C	0 Pkts
1789915811	224 Pkts	220 Pkts	79 Pkts	27 C	0 Pkts
1789912211	251 Pkts	248 Pkts	86 Pkts	26 C	1 Pkts
1789908611	208 Pkts	203 Pkts	63 Pkts	26 C	0 Pkts
1789905011	218 Pkts	213 Pkts	80 Pkts	27 C	0 Pkts
1789901411	163 Pkts	159 Pkts	58 Pkts	26 C	0 Pkts
1789897811	187 Pkts	184 Pkts	82 Pkts	27 C	0 Pkts
1789894211	176 Pkts	174 Pkts	82 Pkts	27 C	0 Pkts
1789890611	161 Pkts	156 Pkts	63 Pkts	27 C	0 Pkts
1789887011	165 Pkts	162 Pkts	57 Pkts	28 C	0 Pkts
1789883411	190 Pkts	187 Pkts	62 Pkts	28 C	0 Pkts
1789879811	199 Pkts	195 Pkts	63 Pkts	29 C	0 Pkts
1789876211	185 Pkts	180 Pkts	58 Pkts	29 C	0 Pkts
1789872611	161 Pkts	156 Pkts	59 Pkts	30 C	0 Pkts
1789869011	166 Pkts	165 Pkts	66 Pkts	31 C	0 Pkts
1789865411	164 Pkts	162 Pkts	63 Pkts	32 C	0 Pkts

*Used Equation Coefficients:

RFIn: 0, 1, 0

RFiGate: 0, 1, 0

DigiRpt: 0, 1, 0

Temp: 0, 1, 0

InetiGate: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)