SN0PEK-6 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SN0PEK-6. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Temp*	SunElev*
1761535480	-0.02 degC	37.83 deg
1761535196	-0.02 degC	38.27 deg
1761534917	-0.02 degC	38.68 deg
1761534642	-0.02 degC	39.09 deg
1761534375	-0.02 degC	39.4 deg
1761534118	-0.02 degC	39.75 deg
1761533856	-0.02 degC	39.97 deg
1761533598	-0.02 degC	40.28 deg
1761533202	-0.02 degC	40.59 deg
1761532935	-0.02 degC	40.75 deg
1761532668	-0.02 degC	40.91 deg
1761531693	-0.02 degC	41.22 deg
1761531415	-0.02 degC	41.22 deg
1761531138	-0.02 degC	41.22 deg
1761530860	-0.02 degC	41.16 deg
1761530584	-0.02 degC	41.09 deg
1761530322	-0.02 degC	41.03 deg
1761529123	-0.02 degC	40.28 deg
1761302713	-0.02 degC	44.17 deg
1761301366	-0.02 degC	45.17 deg
1761301245	-0.02 degC	45.24 deg
1761300718	-0.02 degC	45.46 deg
1761300184	-0.02 degC	45.55 deg
1761299644	-0.02 degC	45.55 deg
1761299094	-0.02 degC	45.42 deg

*Used Equation Coefficients:

Temp: 0, 0.43, -80

Vsolar: 0, 0.1, 0

SunElev: 0, 0.3137, 0

Value4: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)