N7UV Telemetry

This is the latest recevied telemetry packets stored in our database for station/object N7UV. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Eff1h*	RmTmp*
1762008068	13.8 Volt	370 Pkt	74 Pcnt	26.16 deg C
1762007469	13.8 Volt	380 Pkt	74 Pcnt	26.16 deg C
1762007468	13.8 Volt	380 Pkt	74 Pcnt	26.16 deg C
1762006868	13.8 Volt	370 Pkt	74 Pcnt	26.16 deg C
1762006268	13.8 Volt	370 Pkt	75 Pcnt	26.16 deg C
1762005670	13.8 Volt	370 Pkt	73 Pcnt	26.16 deg C
1762005668	13.8 Volt	370 Pkt	73 Pcnt	26.16 deg C
1762005068	13.8 Volt	380 Pkt	75 Pcnt	26.16 deg C
1762004468	13.8 Volt	390 Pkt	75 Pcnt	26.67 deg C
1762003868	13.8 Volt	400 Pkt	75 Pcnt	26.67 deg C
1762003268	13.8 Volt	400 Pkt	75 Pcnt	26.67 deg C
1762002688	13.8 Volt	390 Pkt	75 Pcnt	26.67 deg C
1762002068	13.8 Volt	380 Pkt	74 Pcnt	26.67 deg C
1762001468	13.8 Volt	370 Pkt	73 Pcnt	26.67 deg C
1762000868	13.8 Volt	370 Pkt	75 Pcnt	26.67 deg C
1762000268	13.8 Volt	350 Pkt	74 Pcnt	26.67 deg C
1761999668	13.8 Volt	350 Pkt	74 Pcnt	26.67 deg C
1761998469	13.8 Volt	340 Pkt	73 Pcnt	26.67 deg C
1761997868	13.8 Volt	350 Pkt	71 Pcnt	26.67 deg C
1761997268	13.8 Volt	340 Pkt	70 Pcnt	27.17 deg C
1761996668	13.8 Volt	330 Pkt	69 Pcnt	27.17 deg C
1761996081	13.8 Volt	340 Pkt	69 Pcnt	27.17 deg C
1761995468	13.8 Volt	340 Pkt	69 Pcnt	27.17 deg C
1761994869	13.8 Volt	350 Pkt	70 Pcnt	27.17 deg C
1761994868	13.8 Volt	350 Pkt	70 Pcnt	27.17 deg C

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

RmTmp: 0, 0.5033, -64.43

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)