DJ7AL-4 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DJ7AL-4. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Temp*	Humi*	Baro*
1755502884	26.5 deg C	50.9 %	1020.3 hPa
1755501988	26.5 deg C	47.7 %	1020.3 hPa
1755501084	26.5 deg C	47.5 %	1020.2 hPa
1755500180	26.4 deg C	47.6 %	1020.3 hPa
1755499276	26.3 deg C	47.9 %	1020.2 hPa
1755498780	26.2 deg C	48.9 %	1020.3 hPa
1755497877	26 deg C	53.4 %	1020.2 hPa
1755496978	25.6 deg C	54.5 %	1020.2 hPa
1755496081	25.2 deg C	55.5 %	1020.4 hPa
1755495183	24.6 deg C	57.3 %	1020.3 hPa
1755494277	23.6 deg C	60.3 %	1020.4 hPa
1755493378	22 deg C	64.6 %	1020.4 hPa
1755492483	21.9 deg C	65.1 %	1020.4 hPa
1755491579	21.8 deg C	65.3 %	1020.2 hPa
1755490679	21.8 deg C	65.6 %	1020.1 hPa
1755489778	21.8 deg C	65.6 %	1020.1 hPa
1755488881	21.8 deg C	65.4 %	1020.1 hPa
1755487985	21.9 deg C	65.2 %	1020 hPa
1755487087	21.9 deg C	65.1 %	1019.9 hPa
1755486190	22 deg C	64.8 %	1019.9 hPa
1755485295	22.1 deg C	64.5 %	1020 hPa
1755484391	22.2 deg C	64.4 %	1019.9 hPa
1755483487	22.3 deg C	64.2 %	1020 hPa
1755482588	22.4 deg C	64 %	1020 hPa
1755481686	22.5 deg C	63.6 %	1019.9 hPa

*Used Equation Coefficients:

Temp: 0, 0.1, 0

Humi: 0, 0.1, 0

Baro: 0, 0.1, 0

Value4: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)