KE9DKX-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object KE9DKX-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Temperatura CPU*	Obciazenie CPU*
1765576206	19 Deg.C	2 %
1765575602	17 Deg.C	2 %
1765575007	14 Deg.C	2 %
1765574402	12 Deg.C	2 %
1765573807	13 Deg.C	2 %
1765573202	12 Deg.C	2 %
1765572607	12 Deg.C	2 %
1765572002	13 Deg.C	2 %
1765571406	12 Deg.C	2 %
1765570802	12 Deg.C	2 %
1765570206	12 Deg.C	2 %
1765569601	12 Deg.C	2 %
1765568406	12 Deg.C	2 %
1765567821	13 Deg.C	2 %
1765567206	12 Deg.C	2 %
1765566602	12 Deg.C	2 %
1765566007	12 Deg.C	2 %
1765565402	11 Deg.C	2 %
1765564807	12 Deg.C	2 %
1765564202	11 Deg.C	3 %
1765563607	12 Deg.C	3 %
1765563002	13 Deg.C	3 %
1765562406	13 Deg.C	3 %
1765561802	15 Deg.C	3 %
1765561202	18 Deg.C	3 %

*Used Equation Coefficients:

Temperatura CPU: 0, 0.1, 0

Obciazenie CPU: 0, 1, 0

Value3: 0, 0, 0

Value4: 0, 0, 0

Value5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)