YO2KCB-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object YO2KCB-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*	EffTo*
1772617233	12.48 Volt	200 Pkt	80 Pkt	53 Pcnt	67 Pcnt
1772616339	12.48 Volt	190 Pkt	70 Pkt	50 Pcnt	68 Pcnt
1772615432	12.48 Volt	190 Pkt	50 Pkt	48 Pcnt	67 Pcnt
1772614531	12.48 Volt	170 Pkt	50 Pkt	45 Pcnt	68 Pcnt
1772613630	12.56 Volt	190 Pkt	60 Pkt	52 Pcnt	69 Pcnt
1772612729	12.56 Volt	180 Pkt	70 Pkt	49 Pcnt	69 Pcnt
1772611828	12.48 Volt	190 Pkt	70 Pkt	48 Pcnt	69 Pcnt
1772610927	12.48 Volt	220 Pkt	80 Pkt	54 Pcnt	70 Pcnt
1772610026	12.56 Volt	250 Pkt	90 Pkt	60 Pcnt	70 Pcnt
1772609126	12.48 Volt	290 Pkt	100 Pkt	68 Pcnt	71 Pcnt
1772608225	12.48 Volt	320 Pkt	110 Pkt	68 Pcnt	71 Pcnt
1772607324	12.48 Volt	360 Pkt	120 Pkt	68 Pcnt	71 Pcnt
1772606423	12.48 Volt	380 Pkt	130 Pkt	72 Pcnt	71 Pcnt
1772605522	12.48 Volt	410 Pkt	140 Pkt	71 Pcnt	71 Pcnt
1772604621	12.48 Volt	420 Pkt	140 Pkt	75 Pcnt	72 Pcnt
1772603720	12.48 Volt	400 Pkt	120 Pkt	77 Pcnt	72 Pcnt
1772602820	12.48 Volt	380 Pkt	110 Pkt	74 Pcnt	71 Pcnt
1772601919	12.48 Volt	330 Pkt	100 Pkt	74 Pcnt	71 Pcnt
1772601018	12.48 Volt	290 Pkt	80 Pkt	71 Pcnt	71 Pcnt
1772600117	12.56 Volt	290 Pkt	80 Pkt	70 Pcnt	71 Pcnt
1772599216	12.56 Volt	310 Pkt	80 Pkt	73 Pcnt	71 Pcnt
1772598326	12.56 Volt	330 Pkt	90 Pkt	74 Pcnt	71 Pcnt
1772597414	12.48 Volt	340 Pkt	90 Pkt	79 Pcnt	71 Pcnt
1772596514	12.48 Volt	330 Pkt	90 Pkt	79 Pcnt	71 Pcnt
1772595613	12.48 Volt	330 Pkt	90 Pkt	77 Pcnt	70 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.079, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

EffTo: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)