DB2OM-12 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DB2OM-12. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Press*	Temp.in*	Hum*	QNH*	Temp.out*
1765563148	1008.5 hPa	10.7 C deg	59.8 %	1023.8 hPa	0 C deg
1765561333	1008.4 hPa	10.9 C deg	59.9 %	1023.7 hPa	0 C deg
1765557703	1007.8 hPa	11.2 C deg	59.7 %	1023.1 hPa	0 C deg
1765555886	1007.9 hPa	11.2 C deg	59.7 %	1023.1 hPa	0 C deg
1765554071	1008.3 hPa	11.6 C deg	59.6 %	1023.5 hPa	0 C deg
1765552256	1008 hPa	11.6 C deg	59.6 %	1023.2 hPa	0 C deg
1765550441	1007.8 hPa	11.9 C deg	59.5 %	1023 hPa	0 C deg
1765548626	1007.7 hPa	11.9 C deg	59.5 %	1022.9 hPa	0 C deg
1765546811	1007.8 hPa	11.9 C deg	59.6 %	1023 hPa	0 C deg
1765544995	1007.6 hPa	12.1 C deg	59.5 %	1022.7 hPa	0 C deg
1765543180	1007.7 hPa	12.3 C deg	59.6 %	1022.9 hPa	0 C deg
1765539547	1008 hPa	12.5 C deg	59.6 %	1023.1 hPa	0 C deg
1765537732	1008.1 hPa	12.4 C deg	59.6 %	1023.3 hPa	0 C deg
1765535917	1008 hPa	12.6 C deg	59.4 %	1023.1 hPa	0 C deg
1765534102	1008 hPa	11.5 C deg	59.5 %	1023.2 hPa	0 C deg
1765532283	1008.3 hPa	10.1 C deg	59.9 %	1023.6 hPa	0 C deg
1765530468	1008.3 hPa	9.4 C deg	60 %	1023.7 hPa	0 C deg
1765528653	1008.1 hPa	9.2 C deg	59.9 %	1023.4 hPa	0 C deg
1765526838	1007.8 hPa	8.8 C deg	60 %	1023.1 hPa	0 C deg
1765523205	1007.9 hPa	8.8 C deg	60 %	1023.3 hPa	0 C deg
1765521390	1007.8 hPa	8.9 C deg	60 %	1023.1 hPa	0 C deg
1765519575	1007.6 hPa	8.6 C deg	60 %	1022.9 hPa	0 C deg
1765517757	1007.7 hPa	8.6 C deg	60 %	1023 hPa	0 C deg
1765515942	1007.6 hPa	8.4 C deg	60.1 %	1022.9 hPa	0 C deg
1765514127	1007.5 hPa	8.4 C deg	60.1 %	1022.8 hPa	0 C deg

*Used Equation Coefficients:

Press: 0, 1, 0

Temp.in: 0, 1, 0

Hum: 0, 1, 0

QNH: 0, 1, 0

Temp.out: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)