EL-DD5GG Telemetry

This is the latest recevied telemetry packets stored in our database for station/object EL-DD5GG. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Value1*	Value2*	Value3*	Value4*
1755857350	0.01 RX Erlang	0.04 TX Erlang	2 RXcount/10m	5 TXcount/10m
1755856750	0 RX Erlang	0 TX Erlang	0 RXcount/10m	0 TXcount/10m
1755856150	0 RX Erlang	0 TX Erlang	0 RXcount/10m	0 TXcount/10m
1755855550	0 RX Erlang	0.01 TX Erlang	0 RXcount/10m	1 TXcount/10m
1755854950	0 RX Erlang	0 TX Erlang	0 RXcount/10m	0 TXcount/10m
1755854350	0 RX Erlang	0.02 TX Erlang	0 RXcount/10m	2 TXcount/10m
1755853750	0 RX Erlang	0.04 TX Erlang	0 RXcount/10m	5 TXcount/10m
1755853150	0 RX Erlang	0.48 TX Erlang	0 RXcount/10m	26 TXcount/10m
1755852550	0 RX Erlang	0.86 TX Erlang	0 RXcount/10m	38 TXcount/10m
1755851950	0 RX Erlang	0.62 TX Erlang	0 RXcount/10m	21 TXcount/10m
1755851350	0 RX Erlang	0.04 TX Erlang	0 RXcount/10m	3 TXcount/10m
1755850750	0 RX Erlang	0.38 TX Erlang	0 RXcount/10m	24 TXcount/10m
1755850150	0 RX Erlang	0.63 TX Erlang	0 RXcount/10m	39 TXcount/10m
1755849550	0 RX Erlang	0 TX Erlang	0 RXcount/10m	2 TXcount/10m
1755848950	0 RX Erlang	0.04 TX Erlang	0 RXcount/10m	10 TXcount/10m
1755848350	0.01 RX Erlang	0.04 TX Erlang	3 RXcount/10m	6 TXcount/10m
1755848138	0.01 RX Erlang	0.03 TX Erlang	2 RXcount/10m	3 TXcount/10m
1755839351	0 RX Erlang	0.1 TX Erlang	0 RXcount/10m	9 TXcount/10m
1755838750	0 RX Erlang	0 TX Erlang	0 RXcount/10m	1 TXcount/10m
1755838150	0 RX Erlang	0 TX Erlang	0 RXcount/10m	1 TXcount/10m
1755837550	0 RX Erlang	0.05 TX Erlang	0 RXcount/10m	9 TXcount/10m
1755836950	0 RX Erlang	0.13 TX Erlang	0 RXcount/10m	20 TXcount/10m
1755836350	0 RX Erlang	0.08 TX Erlang	0 RXcount/10m	23 TXcount/10m
1755835750	0 RX Erlang	0.26 TX Erlang	0 RXcount/10m	38 TXcount/10m
1755835150	0 RX Erlang	0.73 TX Erlang	0 RXcount/10m	82 TXcount/10m

*Used Equation Coefficients:

Value1: 0, 1, 0

Value2: 0, 1, 0

Value3: 0, 1, 0

Value4: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)