IQ9DM-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IQ9DM-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	TX*	RX*	Digi*	V_Bat*
1761594089	343 Count	534 Count	329 Count	4.16 VDC
1761592283	318 Count	480 Count	305 Count	4.13 VDC
1761588721	279 Count	391 Count	268 Count	4.18 VDC
1761586918	260 Count	349 Count	250 Count	4.14 VDC
1761585114	235 Count	319 Count	226 Count	4.16 VDC
1761583311	214 Count	289 Count	206 Count	4.2 VDC
1761581508	190 Count	259 Count	183 Count	4.15 VDC
1761579704	160 Count	223 Count	154 Count	4.18 VDC
1761577904	132 Count	187 Count	127 Count	4.2 VDC
1761576097	112 Count	160 Count	108 Count	4.16 VDC
1761574294	88 Count	119 Count	85 Count	4.22 VDC
1761572491	65 Count	90 Count	63 Count	4.15 VDC
1761570687	45 Count	59 Count	44 Count	4.2 VDC
1761568929	27 Count	33 Count	27 Count	4.14 VDC
1761567126	726 Count	1032 Count	698 Count	4.18 VDC
1761565322	695 Count	984 Count	668 Count	4.11 VDC
1761563528	648 Count	927 Count	622 Count	4.16 VDC
1761561716	610 Count	855 Count	585 Count	4.11 VDC
1761559912	578 Count	809 Count	554 Count	4.18 VDC
1761558105	554 Count	771 Count	531 Count	4.17 VDC
1761556302	525 Count	735 Count	503 Count	4.11 VDC
1761554499	500 Count	703 Count	479 Count	4.21 VDC
1761552695	475 Count	672 Count	455 Count	4.15 VDC
1761550892	455 Count	644 Count	436 Count	4.15 VDC
1761549086	430 Count	612 Count	412 Count	4.21 VDC

*Used Equation Coefficients:

TX: 0, 1, 0

RX: 0, 1, 0

Digi: 0, 1, 0

V_Bat: 0, 0.01, 0

V_Ext: 0, 0.02, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)