VK6KHV-4 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object VK6KHV-4. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

Time	Battery*	Charging/AC*	GPS+Sat*
1755776467	100 Percent	48 Charge/On/Off	2 Sats/On/Off
1755775567	100 Percent	48 Charge/On/Off	2 Sats/On/Off
1755774667	100 Percent	48 Charge/On/Off	2 Sats/On/Off
1755773707	100 Percent	48 Charge/On/Off	2 Sats/On/Off
1755772807	100 Percent	48 Charge/On/Off	2 Sats/On/Off
1755771847	100 Percent	48 Charge/On/Off	2 Sats/On/Off
1755770887	100 Percent	48 Charge/On/Off	2 Sats/On/Off
1755769927	100 Percent	48 Charge/On/Off	2 Sats/On/Off
1755769027	100 Percent	48 Charge/On/Off	2 Sats/On/Off
1755768067	100 Percent	48 Charge/On/Off	2 Sats/On/Off
1755767107	100 Percent	48 Charge/On/Off	2 Sats/On/Off
1755766147	100 Percent	48 Charge/On/Off	2 Sats/On/Off
1755765247	100 Percent	48 Charge/On/Off	2 Sats/On/Off
1755764347	100 Percent	48 Charge/On/Off	2 Sats/On/Off
1755763447	100 Percent	48 Charge/On/Off	2 Sats/On/Off
1755762487	100 Percent	48 Charge/On/Off	2 Sats/On/Off
1755761527	100 Percent	48 Charge/On/Off	2 Sats/On/Off
1755760627	100 Percent	48 Charge/On/Off	2 Sats/On/Off
1755759667	100 Percent	48 Charge/On/Off	2 Sats/On/Off
1755758767	100 Percent	48 Charge/On/Off	2 Sats/On/Off

*Used Equation Coefficients:

Battery: 0, 1, 0

Charging/AC: 0, 1, 0

GPS+Sat: 0, 1, 0

Current: 0, 10, -1280

A5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)