LA4WGA-4 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object LA4WGA-4. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Voltage*	Celsius*	Rel_Hum*	Atm_Press*
1778167978	3.47 VDC	21.9 C	39.18 %	1013.88 hPa
1778161041	3.68 VDC	27.2 C	35.66 %	1015.5 hPa
1778160838	3.67 VDC	26.8 C	36.86 %	1016 hPa
1778160304	3.65 VDC	25.7 C	37.37 %	1019.25 hPa
1778160154	3.65 VDC	25.1 C	37.59 %	1015.75 hPa
1778159715	3.62 VDC	22.7 C	40.38 %	1015.5 hPa
1778159343	3.6 VDC	20.9 C	42.05 %	1016.75 hPa
1778157080	3.6 VDC	15.8 C	46.97 %	1021.38 hPa
1778156925	3.6 VDC	15 C	50.27 %	1018.13 hPa
1778156284	3.48 VDC	11.6 C	53.45 %	1015.5 hPa
1778080318	3.58 VDC	15.9 C	47 %	1010.13 hPa
1778079664	3.58 VDC	13.2 C	52.53 %	1005.5 hPa
1778004709	3.53 VDC	12.7 C	47.4 %	1003.13 hPa
1778004518	3.44 VDC	12.4 C	42.9 %	1003 hPa
1777999589	3.52 VDC	19.4 C	42.06 %	1002.25 hPa
1777996196	3.59 VDC	15.9 C	46.88 %	1002.63 hPa
1777995770	3.46 VDC	13.7 C	49.02 %	1003.63 hPa
1777986754	3.54 VDC	13.2 C	55.52 %	1012.38 hPa
1777911439	3.43 VDC	23 C	43.15 %	996.38 hPa
1777903536	3.57 VDC	31.1 C	31.51 %	1001.25 hPa
1777901135	3.66 VDC	32.3 C	29.11 %	1001.25 hPa
1777900245	3.62 VDC	33.2 C	30.8 %	998.63 hPa
1777899985	3.6 VDC	32.8 C	30.7 %	999.25 hPa
1777899767	3.59 VDC	32.2 C	31.56 %	999 hPa
1777899442	3.58 VDC	31.5 C	31.83 %	999.63 hPa

*Used Equation Coefficients:

Voltage: 0, 0.01, 0

Celsius: 0, 0.1, -50

Rel_Hum: 0, 0.01, 0

Atm_Press: 0, 0.125, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)