VE3STP-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object VE3STP-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	PVAVOLTAGE*	PVACURRENT*	PVAPOWER*	GENPWRTODAY*	CONPWRTODAY*
1765511096	0.15 V	0 A	0 W	0 KWH	0.02 KWH
1765509250	0.14 V	0 A	0 W	0 KWH	0.02 KWH
1765507406	0.14 V	0 A	0 W	0 KWH	0.02 KWH
1765505560	0.15 V	0 A	0 W	0 KWH	0.01 KWH
1765503716	0.15 V	0 A	0 W	0 KWH	0.01 KWH
1765501871	0.15 V	0 A	0 W	0 KWH	0.01 KWH
1765500027	0.15 V	0 A	0 W	0 KWH	0 KWH
1765498182	0.15 V	0 A	0 W	0 KWH	0 KWH
1765496338	0.15 V	0 A	0 W	0.01 KWH	0.15 KWH
1765494492	0.14 V	0 A	0 W	0.01 KWH	0.14 KWH
1765492648	0.15 V	0 A	0 W	0.01 KWH	0.14 KWH
1765490803	0.22 V	0 A	0 W	0.01 KWH	0.14 KWH
1765488960	12.57 V	0 A	0 W	0.01 KWH	0.13 KWH
1765487113	12.8 V	0 A	0 W	0.01 KWH	0.13 KWH
1765485269	12.87 V	0.01 A	0.23 W	0.01 KWH	0.12 KWH
1765481578	12.93 V	0.03 A	0.58 W	0.01 KWH	0.12 KWH
1765479732	12.99 V	0.12 A	1.54 W	0.01 KWH	0.11 KWH
1765477888	13.08 V	0.22 A	2.98 W	0.01 KWH	0.11 KWH
1765476042	12.96 V	0.09 A	1.31 W	0.01 KWH	0.11 KWH
1765474196	13.01 V	0.11 A	1.55 W	0.01 KWH	0.1 KWH
1765470507	13.02 V	0.12 A	1.43 W	0 KWH	0.1 KWH
1765468660	13.02 V	0.12 A	1.55 W	0 KWH	0.09 KWH
1765463125	12.99 V	0.1 A	1.31 W	0 KWH	0.08 KWH
1765461281	12.94 V	0.02 A	0.58 W	0 KWH	0.08 KWH
1765457592	12.87 V	0 A	0 W	0 KWH	0.07 KWH

*Used Equation Coefficients:

PVAVOLTAGE: 0, 0.01, 0

PVACURRENT: 0, 0.01, 0

PVAPOWER: 0, 0.01, 0

GENPWRTODAY: 0, 0.01, 0

CONPWRTODAY: 0, 0.01, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)