VE3STP-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object VE3STP-3. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	LOADVOLTAGE*	LOADCURRENT*	LOADPOWER*	GENPWRYR*	CONPWRYR*
1781390713	13.65 V	0.61 A	8.32 W	19.75 KWH	13.31 KWH
1781388869	13.73 V	0.61 A	8.78 W	19.74 KWH	13.31 KWH
1781387024	13.79 V	0.58 A	8.41 W	19.73 KWH	13.3 KWH
1781385182	13.68 V	0.64 A	8.6 W	19.73 KWH	13.3 KWH
1781383334	13.8 V	0.62 A	8.41 W	19.71 KWH	13.3 KWH
1781381491	13.75 V	0.6 A	8.52 W	19.7 KWH	13.3 KWH
1781379646	13.75 V	0.6 A	8.25 W	19.7 KWH	13.29 KWH
1781377803	13.77 V	0.6 A	8.25 W	19.7 KWH	13.29 KWH
1781375957	13.73 V	0.6 A	8.22 W	19.69 KWH	13.29 KWH
1781374113	13.83 V	0.58 A	8.43 W	19.69 KWH	13.28 KWH
1781372268	13.81 V	0.6 A	8.56 W	19.68 KWH	13.28 KWH
1781370423	13.72 V	0.58 A	8.22 W	19.67 KWH	13.28 KWH
1781368578	13.74 V	0.61 A	8.24 W	19.66 KWH	13.28 KWH
1781366736	13.75 V	0.6 A	8.24 W	19.66 KWH	13.27 KWH
1781364889	13.79 V	0.58 A	8.41 W	19.65 KWH	13.27 KWH
1781363045	14.12 V	0.62 A	8.6 W	19.64 KWH	13.27 KWH
1781359354	14.16 V	0.6 A	8.49 W	19.61 KWH	13.26 KWH
1781355665	13.06 V	0.58 A	7.71 W	19.58 KWH	13.25 KWH
1781353822	12.73 V	0.58 A	7.25 W	19.58 KWH	13.25 KWH
1781351977	12.83 V	0.34 A	4.87 W	19.57 KWH	13.25 KWH
1781350133	12.72 V	0.35 A	4.69 W	19.57 KWH	13.25 KWH
1781348287	12.73 V	0.36 A	4.57 W	19.57 KWH	13.25 KWH
1781346443	12.69 V	0.4 A	4.82 W	19.57 KWH	13.25 KWH
1781344598	12.67 V	0.37 A	4.67 W	19.57 KWH	13.25 KWH
1781342754	12.64 V	0.36 A	4.67 W	19.57 KWH	13.24 KWH

*Used Equation Coefficients:

LOADVOLTAGE: 0, 0.01, 0

LOADCURRENT: 0, 0.01, 0

LOADPOWER: 0, 0.01, 0

GENPWRYR: 0, 0.01, 0

CONPWRYR: 0, 0.01, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)