VE3STP-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object VE3STP-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	BATTVOLTAGE*	BATTCURRENT*	BATTPOWER*	GENPWRMN*	CONPWRMN*
1789954437	12.67 V	-0.58 A	-7.47 W	2.79 KWH	1.98 KWH
1789952593	12.67 V	-0.62 A	-7.85 W	2.79 KWH	1.98 KWH
1789950746	12.67 V	-0.57 A	-7.22 W	2.79 KWH	1.98 KWH
1789948915	12.64 V	-0.58 A	-7.33 W	2.79 KWH	1.98 KWH
1789947057	12.7 V	-0.58 A	-7.49 W	2.79 KWH	1.97 KWH
1789945213	13 V	-0.57 A	-7.41 W	2.79 KWH	1.97 KWH
1789943368	13.53 V	-0.39 A	-5.27 W	2.79 KWH	1.97 KWH
1789941525	13.78 V	0.08 A	1.1 W	2.79 KWH	1.96 KWH
1789939679	13.71 V	0.2 A	2.74 W	2.78 KWH	1.96 KWH
1789937835	13.72 V	0.06 A	0.82 W	2.78 KWH	1.96 KWH
1789935989	13.77 V	0.01 A	0.13 W	2.77 KWH	1.96 KWH
1789934146	13.72 V	0.07 A	0.96 W	2.77 KWH	1.95 KWH
1789932299	13.81 V	0.34 A	4.69 W	2.76 KWH	1.95 KWH
1789930455	13.77 V	0.18 A	2.47 W	2.75 KWH	1.95 KWH
1789928609	13.75 V	0.31 A	4.26 W	2.75 KWH	1.94 KWH
1789926763	13.89 V	0.13 A	1.8 W	2.74 KWH	1.94 KWH
1789924919	13.88 V	0.51 A	7.07 W	2.74 KWH	1.94 KWH
1789923074	13.87 V	0.58 A	8.18 W	2.73 KWH	1.94 KWH
1789921231	13.88 V	0.62 A	8.6 W	2.73 KWH	1.93 KWH
1789919384	13.83 V	0.58 A	8.02 W	2.72 KWH	1.93 KWH
1789917541	14.28 V	0.79 A	11.28 W	2.71 KWH	1.93 KWH
1789915696	14.24 V	0.89 A	12.67 W	2.7 KWH	1.92 KWH
1789913852	14.28 V	0.91 A	12.99 W	2.69 KWH	1.92 KWH
1789912007	14.07 V	1.55 A	21.8 W	2.68 KWH	1.92 KWH
1789910163	13.1 V	0.5 A	6.55 W	2.67 KWH	1.92 KWH

*Used Equation Coefficients:

BATTVOLTAGE: 0, 0.01, 0

BATTCURRENT: 0, 0.01, 0

BATTPOWER: 0, 0.01, 0

GENPWRMN: 0, 0.01, 0

CONPWRMN: 0, 0.01, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)