WI1U-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object WI1U-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RFIn*	RFiGate*	DigiRpt*	Temp*
1788578932	196 Pkts	190 Pkts	53 Pkts	25 C
1788575332	32 Pkts	31 Pkts	11 Pkts	25 C
1788571732	0 Pkts	0 Pkts	0 Pkts	25 C
1788568132	0 Pkts	0 Pkts	0 Pkts	24 C
1788564532	0 Pkts	0 Pkts	0 Pkts	24 C
1788560932	0 Pkts	0 Pkts	0 Pkts	23 C
1788557332	0 Pkts	0 Pkts	0 Pkts	25 C
1788553732	2 Pkts	2 Pkts	0 Pkts	24 C
1788550132	0 Pkts	0 Pkts	0 Pkts	25 C
1788546533	1 Pkts	1 Pkts	0 Pkts	25 C
1788542942	6 Pkts	6 Pkts	2 Pkts	25 C
1788539331	3 Pkts	3 Pkts	1 Pkts	25 C
1788535732	16 Pkts	16 Pkts	4 Pkts	25 C
1788532131	37 Pkts	36 Pkts	10 Pkts	25 C
1788528531	43 Pkts	42 Pkts	12 Pkts	24 C
1788524932	154 Pkts	152 Pkts	39 Pkts	24 C
1788521332	138 Pkts	136 Pkts	31 Pkts	24 C
1788517732	103 Pkts	102 Pkts	26 Pkts	24 C
1788514132	139 Pkts	136 Pkts	29 Pkts	24 C
1788510532	123 Pkts	120 Pkts	37 Pkts	24 C
1788506932	154 Pkts	150 Pkts	31 Pkts	24 C
1788503332	125 Pkts	125 Pkts	37 Pkts	24 C
1788499732	90 Pkts	88 Pkts	21 Pkts	24 C
1788496132	153 Pkts	150 Pkts	42 Pkts	25 C
1788492531	142 Pkts	130 Pkts	30 Pkts	25 C

*Used Equation Coefficients:

RFIn: 0, 1, 0

RFiGate: 0, 1, 0

DigiRpt: 0, 1, 0

Temp: 0, 1, 0

InetiGate: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)