DM0STR-5 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DM0STR-5. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Press*	Temp.in*	QNH*	Temp.out*
1761504121	978.2 hPa	21.8 C deg	1000.8 hPa	0 C deg
1761500521	977.6 hPa	21.8 C deg	1000.2 hPa	0 C deg
1761498721	977.2 hPa	21.8 C deg	999.8 hPa	0 C deg
1761495120	976.8 hPa	21.8 C deg	999.4 hPa	0 C deg
1761493320	976.4 hPa	21.9 C deg	999 hPa	0 C deg
1761486120	974.6 hPa	21.9 C deg	997.2 hPa	0 C deg
1761482520	974.6 hPa	21.9 C deg	997.2 hPa	0 C deg
1761480728	974.7 hPa	22.1 C deg	997.3 hPa	0 C deg
1761477130	975.9 hPa	22.1 C deg	998.5 hPa	0 C deg
1761475330	975.5 hPa	22.3 C deg	998.1 hPa	0 C deg
1761473530	975.5 hPa	22.1 C deg	998.1 hPa	0 C deg
1761464519	976.2 hPa	22.5 C deg	998.7 hPa	0 C deg
1761462719	976.4 hPa	22.6 C deg	998.9 hPa	0 C deg
1761460919	976.1 hPa	22.7 C deg	998.6 hPa	0 C deg
1761457322	976.1 hPa	22.8 C deg	998.6 hPa	0 C deg
1761455518	975.8 hPa	22.8 C deg	998.4 hPa	0 C deg
1761453718	976.1 hPa	22.9 C deg	998.6 hPa	0 C deg
1761451918	976.4 hPa	23 C deg	998.9 hPa	0 C deg
1761448318	976.6 hPa	22.9 C deg	999.2 hPa	0 C deg
1761446518	976.9 hPa	22.9 C deg	999.5 hPa	0 C deg
1761444718	977.1 hPa	23 C deg	999.6 hPa	0 C deg
1761442918	977.3 hPa	23 C deg	999.8 hPa	0 C deg
1761441118	977.3 hPa	23 C deg	999.8 hPa	0 C deg
1761433917	977.2 hPa	23.1 C deg	999.8 hPa	0 C deg
1761430317	976.9 hPa	23.2 C deg	999.4 hPa	0 C deg

*Used Equation Coefficients:

Press: 0, 1, 0

Temp.in: 0, 1, 0

Hum: 0, 1, 0

QNH: 0, 1, 0

Temp.out: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)