This is the latest recevied telemetry packets stored in our database for station/object TA1KNN-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time
RxTraffic*
TxTraffic*
RxDrop*
RSSI*
Voltage*
1773328822
266 Pkt
4 Pkt
4 Pkt
-78 dBm
0.1 V
1773327647
170 Pkt
3 Pkt
5 Pkt
-79 dBm
0.1 V
1773327244
360 Pkt
1 Pkt
14 Pkt
-79 dBm
0.1 V
1773324977
114 Pkt
3 Pkt
7 Pkt
-80 dBm
0.1 V
1773319078
360 Pkt
8 Pkt
18 Pkt
-80 dBm
0.1 V
1773316521
424 Pkt
13 Pkt
24 Pkt
-79 dBm
0.1 V
1773314403
196 Pkt
0 Pkt
8 Pkt
-80 dBm
0.1 V
*Used Equation Coefficients:
RxTraffic: 0, 1, 0
TxTraffic: 0, 1, 0
RxDrop: 0, 1, 0
RSSI: 0, -1, 0
Voltage: 0, 1, 0
The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0). The sent equation coefficients is used in the equation: a * value2 + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)