M0IQF-N4 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object M0IQF-N4. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Temperatura CPU*	Obciazenie CPU*
1757485802	42 Deg.C	3 %
1757485210	43 Deg.C	3 %
1757484602	42 Deg.C	3 %
1757484005	42 Deg.C	3 %
1757483401	42 Deg.C	3 %
1757482805	42 Deg.C	3 %
1757482202	42 Deg.C	3 %
1757481605	42 Deg.C	3 %
1757481002	42 Deg.C	3 %
1757480405	42 Deg.C	3 %
1757479802	42 Deg.C	3 %
1757479205	42 Deg.C	3 %
1757478601	43 Deg.C	3 %
1757478001	42 Deg.C	3 %
1757477405	42 Deg.C	3 %
1757476801	43 Deg.C	3 %
1757476205	42 Deg.C	3 %
1757475614	42 Deg.C	3 %
1757475005	44 Deg.C	3 %
1757474402	42 Deg.C	3 %
1757473801	42 Deg.C	3 %
1757473204	43 Deg.C	3 %
1757472602	43 Deg.C	3 %
1757472005	43 Deg.C	3 %
1757471401	44 Deg.C	3 %

*Used Equation Coefficients:

Temperatura CPU: 0, 0.1, 0

Obciazenie CPU: 0, 1, 0

Value3: 0, 0, 0

Value4: 0, 0, 0

Value5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)