SQ1JKB-FM Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SQ1JKB-FM. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Temperatura CPU*	Obciazenie CPU*
1781377802	35 Deg.C	4 %
1781377205	36 Deg.C	4 %
1781376601	36 Deg.C	4 %
1781376002	37 Deg.C	4 %
1781375404	38 Deg.C	4 %
1781374801	39 Deg.C	4 %
1781374205	38 Deg.C	4 %
1781373601	38 Deg.C	4 %
1781373004	37 Deg.C	3 %
1781372401	36 Deg.C	3 %
1781371801	36 Deg.C	3 %
1781371204	36 Deg.C	4 %
1781370602	36 Deg.C	4 %
1781370004	36 Deg.C	5 %
1781369402	38 Deg.C	5 %
1781368805	37 Deg.C	9 %
1781368204	38 Deg.C	5 %
1781367618	38 Deg.C	5 %
1781367004	37 Deg.C	5 %
1781366402	38 Deg.C	5 %
1781365805	38 Deg.C	5 %
1781365201	38 Deg.C	5 %
1781364602	38 Deg.C	5 %
1781364005	38 Deg.C	5 %
1781363401	38 Deg.C	5 %

*Used Equation Coefficients:

Temperatura CPU: 0, 0.1, 0

Obciazenie CPU: 0, 1, 0

Value3: 0, 0, 0

Value4: 0, 0, 0

Value5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)