VK4RGT-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object VK4RGT-3. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Voltage*	Rx1h*	DgR1h*	Eff1h*
1753704088	13.95 Volt	70 Pkt	38.67 Pcnt	54 Pcnt
1753703488	13.95 Volt	70 Pkt	37.33 Pcnt	52 Pcnt
1753702889	13.95 Volt	60 Pkt	43.75 Pcnt	50 Pcnt
1753701688	13.95 Volt	80 Pkt	32.94 Pcnt	55 Pcnt
1753701088	13.95 Volt	90 Pkt	29.79 Pcnt	60 Pcnt
1753700488	13.95 Volt	100 Pkt	28.43 Pcnt	62 Pcnt
1753699888	13.95 Volt	90 Pkt	29.59 Pcnt	63 Pcnt
1753699289	13.95 Volt	90 Pkt	28.57 Pcnt	66 Pcnt
1753698688	13.95 Volt	110 Pkt	25.66 Pcnt	68 Pcnt
1753698091	13.95 Volt	110 Pkt	26.72 Pcnt	70 Pcnt
1753697488	13.95 Volt	110 Pkt	27.68 Pcnt	69 Pcnt
1753696888	13.95 Volt	120 Pkt	26.83 Pcnt	71 Pcnt
1753696288	13.95 Volt	130 Pkt	26.67 Pcnt	75 Pcnt
1753695690	13.95 Volt	130 Pkt	27.07 Pcnt	76 Pcnt
1753694488	13.95 Volt	130 Pkt	23.53 Pcnt	65 Pcnt
1753693289	13.95 Volt	130 Pkt	15.94 Pcnt	58 Pcnt
1753692689	13.95 Volt	150 Pkt	15.48 Pcnt	58 Pcnt
1753692089	13.95 Volt	160 Pkt	14.55 Pcnt	60 Pcnt
1753691488	13.95 Volt	180 Pkt	15.87 Pcnt	62 Pcnt
1753690889	13.95 Volt	180 Pkt	14.52 Pcnt	65 Pcnt
1753690301	13.95 Volt	170 Pkt	16.95 Pcnt	67 Pcnt
1753689689	13.95 Volt	160 Pkt	18.63 Pcnt	65 Pcnt
1753689088	13.95 Volt	130 Pkt	19.71 Pcnt	62 Pcnt
1753688489	13.95 Volt	100 Pkt	26.92 Pcnt	58 Pcnt
1753687889	13.95 Volt	100 Pkt	29.52 Pcnt	45 Pcnt

*Used Equation Coefficients:

Temp: 0, 0.5, -64

Voltage: 0, 0.075, 0

Rx1h: 0, 10, 0

DgR1h: 0, 0.001, 0

Eff1h: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)