LU2DGE-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object LU2DGE-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	CPU*	MB*	RAM*	FAN*	VCORE*
1773282603	38 °C	33 °C	26 %	1290 RPM	1.1 V
1773280809	37 °C	33 °C	26 %	1290 RPM	1.1 V
1773279010	36 °C	33 °C	26 %	1290 RPM	1.1 V
1773277203	38 °C	33 °C	26 %	1290 RPM	1.1 V
1773275403	38 °C	33 °C	26 %	1275 RPM	1.1 V
1773273604	37 °C	33 °C	26 %	1290 RPM	1.1 V
1773271804	38 °C	33 °C	26 %	1290 RPM	1.1 V
1773270003	38 °C	33 °C	26 %	1290 RPM	1.1 V
1773268204	37 °C	33 °C	26 %	1290 RPM	1.1 V
1773266404	37 °C	33 °C	25 %	1275 RPM	1.1 V
1773264603	37 °C	33 °C	25 %	1290 RPM	1.1 V
1773262804	37 °C	33 °C	26 %	1290 RPM	1.1 V
1773261004	36 °C	33 °C	25 %	1290 RPM	1.1 V
1773248404	36 °C	33 °C	25 %	1290 RPM	1.1 V
1773246603	37 °C	32 °C	25 %	1290 RPM	1.1 V
1773244804	37 °C	32 °C	25 %	1290 RPM	1.1 V
1773243004	37 °C	32 °C	25 %	1275 RPM	1.1 V
1773237603	36 °C	32 °C	25 %	1290 RPM	1.1 V
1773235804	37 °C	32 °C	25 %	1290 RPM	1.1 V
1773234002	36 °C	32 °C	25 %	1290 RPM	1.1 V
1773225004	34 °C	30 °C	21 %	1290 RPM	1.1 V
1773185403	37 °C	33 °C	25 %	1290 RPM	1.1 V
1773183603	36 °C	33 °C	24 %	1290 RPM	1.1 V
1773181803	37 °C	33 °C	24 %	1290 RPM	1.1 V
1773176403	37 °C	33 °C	24 %	1290 RPM	1.1 V

*Used Equation Coefficients:

CPU: 0, 1, 0

MB: 0, 1, 0

RAM: 0, 1, 0

FAN: 0, 15, 0

VCORE: 0, 0.01, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)