TCSAR-14 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object TCSAR-14. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	TxTraffic*	RxDrop*	RSSI*	Voltage*
1787550478	517 Pkt	0 Pkt	0 Pkt	0 dBm	0 V
1787548072	517 Pkt	0 Pkt	0 Pkt	0 dBm	0 V
1787548021	517 Pkt	0 Pkt	0 Pkt	0 dBm	0 V
1787547759	517 Pkt	0 Pkt	0 Pkt	0 dBm	0 V
1787546675	516 Pkt	0 Pkt	0 Pkt	0 dBm	0 V
1787545775	516 Pkt	0 Pkt	0 Pkt	0 dBm	0 V
1787544875	516 Pkt	0 Pkt	0 Pkt	0 dBm	0 V
1787543975	517 Pkt	0 Pkt	0 Pkt	0 dBm	0 V
1787543074	517 Pkt	0 Pkt	0 Pkt	0 dBm	0 V
1787542201	516 Pkt	0 Pkt	0 Pkt	0 dBm	0 V
1787541274	517 Pkt	0 Pkt	0 Pkt	0 dBm	0 V
1787540373	517 Pkt	0 Pkt	0 Pkt	0 dBm	0 V
1787539477	517 Pkt	0 Pkt	0 Pkt	0 dBm	0 V
1787538577	516 Pkt	0 Pkt	0 Pkt	0 dBm	0 V
1787537677	519 Pkt	0 Pkt	0 Pkt	0 dBm	0 V
1787536777	516 Pkt	0 Pkt	0 Pkt	0 dBm	0 V
1787535877	516 Pkt	0 Pkt	0 Pkt	0 dBm	0 V
1787534976	517 Pkt	0 Pkt	0 Pkt	0 dBm	0 V
1787534076	517 Pkt	0 Pkt	0 Pkt	0 dBm	0 V
1787533176	518 Pkt	0 Pkt	0 Pkt	0 dBm	0 V
1787532276	517 Pkt	0 Pkt	0 Pkt	0 dBm	0 V
1787531376	516 Pkt	0 Pkt	0 Pkt	0 dBm	0 V
1787530475	516 Pkt	0 Pkt	0 Pkt	0 dBm	0 V
1787529575	517 Pkt	0 Pkt	0 Pkt	0 dBm	0 V
1787528675	517 Pkt	0 Pkt	0 Pkt	0 dBm	0 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)