SV1IW-11 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SV1IW-11. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	TX*	RX*	Digi*	V_Bat*
1756346547	74 Count	28 Count	28 Count	0.28 VDC
1756345643	72 Count	27 Count	27 Count	0.28 VDC
1756344741	70 Count	26 Count	26 Count	0.28 VDC
1756342031	64 Count	23 Count	23 Count	0.28 VDC
1756340225	60 Count	21 Count	21 Count	0.28 VDC
1756336613	52 Count	17 Count	17 Count	0.28 VDC
1756334809	48 Count	15 Count	15 Count	0.28 VDC
1756333894	45 Count	14 Count	14 Count	0.28 VDC
1756333610	43 Count	13 Count	13 Count	0.28 VDC
1756331807	38 Count	9 Count	9 Count	0.28 VDC
1756330004	34 Count	6 Count	6 Count	0.28 VDC
1756328201	33 Count	6 Count	6 Count	0.28 VDC
1756326398	32 Count	6 Count	6 Count	0.28 VDC
1756324595	31 Count	6 Count	6 Count	0.28 VDC
1756322792	30 Count	6 Count	6 Count	0.28 VDC
1756319186	28 Count	6 Count	6 Count	0.28 VDC
1756317383	27 Count	6 Count	6 Count	0.28 VDC
1756315580	26 Count	6 Count	6 Count	0.28 VDC
1756313814	25 Count	6 Count	6 Count	0.28 VDC
1756312011	24 Count	6 Count	6 Count	0.28 VDC
1756310208	23 Count	6 Count	6 Count	0.28 VDC
1756308405	22 Count	6 Count	6 Count	0.28 VDC
1756306602	21 Count	6 Count	6 Count	0.28 VDC
1756304799	20 Count	6 Count	6 Count	0.28 VDC
1756302995	19 Count	6 Count	6 Count	0.28 VDC

*Used Equation Coefficients:

TX: 0, 1, 0

RX: 0, 1, 0

Digi: 0, 1, 0

V_Bat: 0, 0.01, 0

V_Ext: 0, 0.02, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)