EA5AIF-7 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object EA5AIF-7. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	Celsius*	Rel_Hum*	Atm_Press*
1777192414	23.4 C	56.91 %	1020 hPa
1777154287	18 C	69.45 %	1020.13 hPa
1777154057	17.5 C	69.8 %	1019.38 hPa
1777153620	16.4 C	69.65 %	1019.75 hPa
1777153428	15.9 C	68.56 %	1023.13 hPa
1777153238	15.4 C	67.06 %	1024.5 hPa
1777113006	22.7 C	62.28 %	1022.25 hPa
1777112831	22.6 C	62.22 %	1021.63 hPa
1777112636	22.4 C	62.4 %	1020.13 hPa
1777112417	22.3 C	63.11 %	1019.88 hPa
1777111424	20.9 C	65.82 %	1022 hPa
1777045251	24.1 C	53.17 %	1018.63 hPa
1777036225	25.2 C	47.51 %	1017 hPa
1777028690	28.2 C	43.64 %	1017.63 hPa
1777026960	30.9 C	42.54 %	1018.88 hPa
1777018716	31.5 C	42.6 %	1019.13 hPa
1777018432	31.5 C	43.66 %	1019.38 hPa
1777017630	30 C	47.53 %	1019.75 hPa
1777017352	28.9 C	48.43 %	1019.13 hPa
1777016690	26.3 C	50.87 %	1019.75 hPa
1777015954	720 C	5128 %	8155 hPa
1776939692	799 C	4392 %	8146 hPa
1776933334	816 C	4137 %	8128 hPa
1776932586	829 C	4034 %	8138 hPa
1776859356	847 C	3632 %	8101 hPa

*Used Equation Coefficients:

Celsius: 0, 0.1, -50

Rel_Hum: 0, 0.01, 0

Atm_Press: 0, 0.125, 0

Value4: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)