SP7VCL-FM Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SP7VCL-FM. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Temperatura CPU*	Obciazenie CPU*
1772624404	41 Deg.C	3 %
1772623802	41 Deg.C	3 %
1772623201	42 Deg.C	3 %
1772622605	41 Deg.C	3 %
1772622001	42 Deg.C	3 %
1772621405	41 Deg.C	3 %
1772620802	41 Deg.C	3 %
1772620205	41 Deg.C	3 %
1772619601	41 Deg.C	3 %
1772619005	42 Deg.C	3 %
1772618401	42 Deg.C	3 %
1772617805	42 Deg.C	3 %
1772617201	41 Deg.C	3 %
1772616605	41 Deg.C	3 %
1772616001	41 Deg.C	3 %
1772615402	41 Deg.C	3 %
1772614805	41 Deg.C	3 %
1772614202	41 Deg.C	3 %
1772613604	42 Deg.C	3 %
1772613002	42 Deg.C	3 %
1772612405	41 Deg.C	3 %
1772611801	41 Deg.C	3 %
1772611202	41 Deg.C	3 %
1772610605	41 Deg.C	3 %
1772610001	41 Deg.C	3 %

*Used Equation Coefficients:

Temperatura CPU: 0, 0.1, 0

Obciazenie CPU: 0, 1, 0

Value3: 0, 0, 0

Value4: 0, 0, 0

Value5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)