SQ5MKM-FM Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SQ5MKM-FM. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Temperatura CPU*	Obciazenie CPU*
1757535003	42 Deg.C	33 %
1757534406	43 Deg.C	34 %
1757533802	42 Deg.C	34 %
1757533202	43 Deg.C	34 %
1757532605	42 Deg.C	34 %
1757532003	43 Deg.C	34 %
1757531406	42 Deg.C	34 %
1757530205	42 Deg.C	34 %
1757529602	42 Deg.C	35 %
1757526602	42 Deg.C	36 %
1757526006	42 Deg.C	36 %
1757525402	42 Deg.C	36 %
1757524802	42 Deg.C	36 %
1757524205	42 Deg.C	37 %
1757523602	42 Deg.C	37 %
1757523006	42 Deg.C	37 %
1757522402	42 Deg.C	38 %
1757521806	42 Deg.C	38 %
1757521202	42 Deg.C	38 %
1757520602	42 Deg.C	39 %
1757520005	42 Deg.C	39 %
1757519402	42 Deg.C	39 %
1757518806	42 Deg.C	40 %
1757518202	42 Deg.C	40 %
1757517606	42 Deg.C	40 %

*Used Equation Coefficients:

Temperatura CPU: 0, 0.1, 0

Obciazenie CPU: 0, 1, 0

Value3: 0, 0, 0

Value4: 0, 0, 0

Value5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)