VU2JEK-13 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object VU2JEK-13. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	WiFi*	BaudRate*
1757565681	76 dB	1200 bps
1757564961	74 dB	1200 bps
1757564241	77 dB	1200 bps
1757563521	74 dB	1200 bps
1757562801	74 dB	1200 bps
1757562081	75 dB	1200 bps
1757561361	75 dB	1200 bps
1757560641	75 dB	1200 bps
1757559921	76 dB	1200 bps
1757559201	75 dB	1200 bps
1757558481	76 dB	1200 bps
1757557761	75 dB	1200 bps
1757557041	74 dB	1200 bps
1757556321	76 dB	1200 bps
1757555601	73 dB	1200 bps
1757554881	74 dB	1200 bps
1757554161	75 dB	1200 bps
1757553440	75 dB	1200 bps
1757552723	75 dB	1200 bps
1757552001	75 dB	1200 bps
1757551280	76 dB	1200 bps
1757550560	75 dB	1200 bps
1757549840	75 dB	1200 bps
1757549137	75 dB	1200 bps
1757548400	75 dB	1200 bps

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

WiFi: 0, 1, 100

BaudRate: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)