HB9CT-5 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HB9CT-5. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	TX*	RX*	Digi*	V_Bat*	V_Ext*
1757464431	0 Count	0 Count	0 Count	0 VDC	0 VDC
1757463530	0 Count	0 Count	0 Count	0 VDC	0 VDC
1757462630	0 Count	0 Count	0 Count	0 VDC	0 VDC
1757461730	0 Count	0 Count	0 Count	0 VDC	0 VDC
1757460830	0 Count	0 Count	0 Count	0 VDC	0 VDC
1757459930	0 Count	0 Count	0 Count	0 VDC	0 VDC
1757459030	0 Count	0 Count	0 Count	0 VDC	0 VDC
1757458130	0 Count	0 Count	0 Count	0 VDC	0 VDC
1757457230	0 Count	0 Count	0 Count	0 VDC	0 VDC
1757456330	0 Count	0 Count	0 Count	0 VDC	0 VDC
1757455430	0 Count	0 Count	0 Count	0 VDC	0 VDC
1757454530	0 Count	0 Count	0 Count	0 VDC	0 VDC
1757453630	0 Count	0 Count	0 Count	0 VDC	0 VDC
1757452730	0 Count	0 Count	0 Count	0 VDC	0 VDC
1757451830	0 Count	0 Count	0 Count	0 VDC	0 VDC
1757450929	0 Count	0 Count	0 Count	0 VDC	0 VDC
1757450030	0 Count	0 Count	0 Count	0 VDC	0 VDC
1757449130	0 Count	0 Count	0 Count	0 VDC	0 VDC
1757448230	0 Count	0 Count	0 Count	0 VDC	0 VDC
1757447330	0 Count	0 Count	0 Count	0 VDC	0 VDC
1757446430	0 Count	0 Count	0 Count	0 VDC	0 VDC
1757445529	0 Count	0 Count	0 Count	0 VDC	0 VDC
1757444629	0 Count	0 Count	0 Count	0 VDC	0 VDC
1757443729	0 Count	0 Count	0 Count	0 VDC	0 VDC
1757442829	0 Count	0 Count	0 Count	0 VDC	0 VDC

*Used Equation Coefficients:

TX: 0, 1, 0

RX: 0, 1, 0

Digi: 0, 1, 0

V_Bat: 0, 0.01, 0

V_Ext: 0, 0.02, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)