DB3KE-9 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DB3KE-9. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Press*	Temp.in*	Hum*	QNH*	Temp.out*
1761457890	992.6 hPa	5.1 C deg	33.1 %	1005.6 hPa	5.3 C deg
1761456075	992.6 hPa	4.8 C deg	33.2 %	1005.6 hPa	5 C deg
1761454260	992.6 hPa	4.7 C deg	33.2 %	1005.6 hPa	4.9 C deg
1761450630	992.3 hPa	5.1 C deg	33.3 %	1005.3 hPa	5.3 C deg
1761448815	992.4 hPa	5.5 C deg	33.4 %	1005.4 hPa	5.6 C deg
1761447000	992.3 hPa	6 C deg	33.4 %	1005.2 hPa	5.9 C deg
1761445188	992.2 hPa	5.7 C deg	33.5 %	1005.2 hPa	5.5 C deg
1761441554	992.3 hPa	6.2 C deg	33.6 %	1005.2 hPa	6.1 C deg
1761436116	992 hPa	6.8 C deg	33.6 %	1004.9 hPa	6.7 C deg
1761434304	992.2 hPa	6.7 C deg	33.7 %	1005.1 hPa	6.7 C deg
1761432481	992 hPa	6.8 C deg	33.7 %	1004.9 hPa	6.7 C deg
1761428849	992.2 hPa	7.3 C deg	33.8 %	1005.1 hPa	7.1 C deg
1761425219	992 hPa	7.8 C deg	33.8 %	1004.8 hPa	7.4 C deg
1761423404	991.7 hPa	8.1 C deg	33.8 %	1004.5 hPa	8.1 C deg
1761421589	991.6 hPa	7.9 C deg	33.7 %	1004.4 hPa	7.9 C deg
1761419777	991.7 hPa	8.1 C deg	33.7 %	1004.5 hPa	8.1 C deg
1761417965	991.7 hPa	8.2 C deg	33.8 %	1004.5 hPa	8.2 C deg
1761412516	991.4 hPa	8.4 C deg	33.9 %	1004.2 hPa	8.2 C deg
1761407073	990.6 hPa	8.9 C deg	33.9 %	1003.4 hPa	8.8 C deg
1761401623	989.4 hPa	10.4 C deg	34.2 %	1002.1 hPa	9.8 C deg
1761399808	989.1 hPa	10.5 C deg	34.2 %	1001.8 hPa	9.9 C deg
1761397993	988.6 hPa	10.4 C deg	34.2 %	1001.3 hPa	9.8 C deg
1761396182	988 hPa	10.1 C deg	34.1 %	1000.7 hPa	9.8 C deg
1761394363	987.5 hPa	10 C deg	34.2 %	1000.2 hPa	9.6 C deg
1761387102	986.6 hPa	11 C deg	34.1 %	999.2 hPa	10.3 C deg

*Used Equation Coefficients:

Press: 0, 1, 0

Temp.in: 0, 1, 0

Hum: 0, 1, 0

QNH: 0, 1, 0

Temp.out: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)