ER-OISE Telemetry

This is the latest recevied telemetry packets stored in our database for station/object ER-OISE. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Value1*	Value2*	Value3*	Value4*
1757449939	0 RX Erlang	0.01 TX Erlang	0 RXcount/10m	1 TXcount/10m
1757449339	0 RX Erlang	0 TX Erlang	0 RXcount/10m	0 TXcount/10m
1757448739	0 RX Erlang	0 TX Erlang	0 RXcount/10m	0 TXcount/10m
1757448139	0 RX Erlang	0.02 TX Erlang	0 RXcount/10m	1 TXcount/10m
1757447539	0 RX Erlang	0 TX Erlang	0 RXcount/10m	0 TXcount/10m
1757446939	0 RX Erlang	0 TX Erlang	0 RXcount/10m	0 TXcount/10m
1757446339	0 RX Erlang	0.01 TX Erlang	0 RXcount/10m	1 TXcount/10m
1757445739	0 RX Erlang	0 TX Erlang	0 RXcount/10m	0 TXcount/10m
1757445139	0 RX Erlang	0.01 TX Erlang	0 RXcount/10m	2 TXcount/10m
1757444539	0 RX Erlang	0.01 TX Erlang	0 RXcount/10m	1 TXcount/10m
1757443939	0 RX Erlang	0 TX Erlang	0 RXcount/10m	0 TXcount/10m
1757443339	0 RX Erlang	0 TX Erlang	0 RXcount/10m	0 TXcount/10m
1757442739	0 RX Erlang	0.01 TX Erlang	0 RXcount/10m	1 TXcount/10m
1757442139	0 RX Erlang	0 TX Erlang	0 RXcount/10m	0 TXcount/10m
1757441539	0 RX Erlang	0 TX Erlang	0 RXcount/10m	0 TXcount/10m
1757440939	0 RX Erlang	0.04 TX Erlang	0 RXcount/10m	4 TXcount/10m
1757440339	0 RX Erlang	0 TX Erlang	0 RXcount/10m	0 TXcount/10m
1757439739	0 RX Erlang	0.69 TX Erlang	0 RXcount/10m	8 TXcount/10m
1757439139	0.07 RX Erlang	0.83 TX Erlang	1 RXcount/10m	8 TXcount/10m
1757438539	0.42 RX Erlang	0.52 TX Erlang	4 RXcount/10m	12 TXcount/10m
1757437939	0.3 RX Erlang	0.52 TX Erlang	12 RXcount/10m	19 TXcount/10m
1757437339	0.4 RX Erlang	0.54 TX Erlang	3 RXcount/10m	8 TXcount/10m
1757436739	0.33 RX Erlang	0.48 TX Erlang	5 RXcount/10m	11 TXcount/10m
1757436139	0.01 RX Erlang	0.18 TX Erlang	1 RXcount/10m	5 TXcount/10m
1757435539	0.08 RX Erlang	0.51 TX Erlang	6 RXcount/10m	20 TXcount/10m

*Used Equation Coefficients:

Value1: 0, 1, 0

Value2: 0, 1, 0

Value3: 0, 1, 0

Value4: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)