EL-PY4EI Telemetry

This is the latest recevied telemetry packets stored in our database for station/object EL-PY4EI. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Value1*	Value2*	Value3*	Value4*
1753668107	0 RX Erlang	1 TX Erlang	0 RXcount/10m	1 TXcount/10m
1753666307	0 RX Erlang	12 TX Erlang	0 RXcount/10m	2 TXcount/10m
1753662707	0 RX Erlang	472 TX Erlang	0 RXcount/10m	26 TXcount/10m
1753660907	0 RX Erlang	238 TX Erlang	0 RXcount/10m	12 TXcount/10m
1753659107	0 RX Erlang	245 TX Erlang	0 RXcount/10m	33 TXcount/10m
1753655507	0 RX Erlang	321 TX Erlang	0 RXcount/10m	39 TXcount/10m
1753653707	0 RX Erlang	803 TX Erlang	0 RXcount/10m	50 TXcount/10m
1753651907	0 RX Erlang	840 TX Erlang	0 RXcount/10m	38 TXcount/10m
1753650107	0 RX Erlang	860 TX Erlang	0 RXcount/10m	41 TXcount/10m
1753648307	0 RX Erlang	564 TX Erlang	0 RXcount/10m	62 TXcount/10m
1753646507	0 RX Erlang	81 TX Erlang	0 RXcount/10m	10 TXcount/10m
1753642907	0 RX Erlang	32 TX Erlang	0 RXcount/10m	141 TXcount/10m
1753641107	0 RX Erlang	148 TX Erlang	0 RXcount/10m	123 TXcount/10m
1753639307	0 RX Erlang	79 TX Erlang	0 RXcount/10m	22 TXcount/10m
1753637507	0 RX Erlang	216 TX Erlang	0 RXcount/10m	22 TXcount/10m
1753635707	0 RX Erlang	655 TX Erlang	0 RXcount/10m	27 TXcount/10m
1753633907	0 RX Erlang	699 TX Erlang	0 RXcount/10m	44 TXcount/10m
1753632107	0 RX Erlang	909 TX Erlang	0 RXcount/10m	92 TXcount/10m
1753630307	0 RX Erlang	640 TX Erlang	0 RXcount/10m	20 TXcount/10m
1753626707	0 RX Erlang	235 TX Erlang	0 RXcount/10m	31 TXcount/10m
1753624907	0 RX Erlang	102 TX Erlang	0 RXcount/10m	28 TXcount/10m
1753623107	0 RX Erlang	14 TX Erlang	0 RXcount/10m	13 TXcount/10m
1753621307	0 RX Erlang	567 TX Erlang	0 RXcount/10m	26 TXcount/10m
1753619507	0 RX Erlang	939 TX Erlang	0 RXcount/10m	28 TXcount/10m
1753617707	0 RX Erlang	921 TX Erlang	0 RXcount/10m	30 TXcount/10m

*Used Equation Coefficients:

Value1: 0, 1, 0

Value2: 0, 1, 0

Value3: 0, 1, 0

Value4: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)