Overview Statistics Trail Chart Weather Telemetry Raw packets
 

This is the latest recevied telemetry packets stored in our database for station/object IQ3GO-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>
Time Rx10m* Rx1h* Dg10m* Eff1h* Vin*
1787574741 0 Pkt 0 Pkt 0 Pkt 100 Pcnt 12.15 Volt
1787574441 0 Pkt 0 Pkt 0 Pkt 100 Pcnt 12.15 Volt
1787574141 0 Pkt 0 Pkt 0 Pkt 100 Pcnt 12.15 Volt
1787573841 0 Pkt 0 Pkt 0 Pkt 100 Pcnt 12.15 Volt
1787573541 0 Pkt 0 Pkt 0 Pkt 100 Pcnt 12.15 Volt
1787573241 0 Pkt 0 Pkt 0 Pkt 100 Pcnt 12.15 Volt
1787572941 0 Pkt 0 Pkt 0 Pkt 100 Pcnt 12.15 Volt
1787572641 0 Pkt 0 Pkt 0 Pkt 100 Pcnt 12.15 Volt
1787572341 0 Pkt 0 Pkt 0 Pkt 100 Pcnt 12.15 Volt
1787572041 0 Pkt 0 Pkt 0 Pkt 100 Pcnt 12.15 Volt
1787571741 0 Pkt 0 Pkt 0 Pkt 100 Pcnt 12.15 Volt
1787571441 0 Pkt 0 Pkt 0 Pkt 100 Pcnt 12.15 Volt
1787571141 0 Pkt 0 Pkt 0 Pkt 100 Pcnt 12.15 Volt
1787570541 0 Pkt 0 Pkt 0 Pkt 100 Pcnt 12.15 Volt
1787570241 0 Pkt 0 Pkt 0 Pkt 100 Pcnt 12.15 Volt
1787569941 0 Pkt 0 Pkt 0 Pkt 100 Pcnt 12.15 Volt
1787569641 0 Pkt 0 Pkt 0 Pkt 100 Pcnt 12.15 Volt
1787569341 0 Pkt 0 Pkt 0 Pkt 100 Pcnt 12.15 Volt
1787569041 0 Pkt 0 Pkt 0 Pkt 100 Pcnt 12.15 Volt
1787568741 0 Pkt 0 Pkt 0 Pkt 100 Pcnt 12.15 Volt
1787568441 0 Pkt 0 Pkt 0 Pkt 100 Pcnt 12.15 Volt
1787568141 0 Pkt 0 Pkt 0 Pkt 100 Pcnt 12.15 Volt
1787567841 0 Pkt 0 Pkt 0 Pkt 100 Pcnt 12.15 Volt
1787567541 0 Pkt 0 Pkt 0 Pkt 100 Pcnt 12.15 Volt
1787567241 0 Pkt 0 Pkt 0 Pkt 100 Pcnt 12.15 Volt
*Used Equation Coefficients:
Rx10m: 0, 1, 0
Rx1h: 0, 10, 0
Dg10m: 0, 1, 0
Eff1h: 0, 1, 0
Vin: 0, 0.075, 0

  • The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
  • Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
    The sent equation coefficients is used in the equation: a * value2 + b * value + c.
  • The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
  • The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
  • All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
  • A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)