VK5RNB-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object VK5RNB-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Temp*	Battery*	TX*	Value4*	Value5*
1757559318	22.5 Deg.C	13.5 Volts	5 PTT's	2	37
1757557520	22.5 Deg.C	13.5 Volts	4 PTT's	2	7
1757555718	23 Deg.C	13.5 Volts	5 PTT's	1	37
1757553919	23 Deg.C	13.5 Volts	4 PTT's	1	7
1757552119	20.5 Deg.C	13.5 Volts	5 PTT's	0	37
1757550318	19.5 Deg.C	13.5 Volts	4 PTT's	0	7
1757548522	18 Deg.C	13.5 Volts	5 PTT's	23	37
1757546718	17.5 Deg.C	13.5 Volts	4 PTT's	23	7
1757544923	17 Deg.C	13.5 Volts	5 PTT's	22	37
1757543119	16.5 Deg.C	13.5 Volts	5 PTT's	22	7
1757541323	16 Deg.C	13.5 Volts	5 PTT's	21	37
1757539519	16 Deg.C	13.5 Volts	4 PTT's	21	7
1757537720	16 Deg.C	13.5 Volts	5 PTT's	20	37
1757535918	16 Deg.C	13.5 Volts	4 PTT's	20	7
1757532319	16 Deg.C	13.5 Volts	4 PTT's	19	7
1757530520	16 Deg.C	13.5 Volts	5 PTT's	18	37
1757526919	16 Deg.C	13.5 Volts	5 PTT's	17	37
1757525119	16.5 Deg.C	13.5 Volts	4 PTT's	17	7
1757523320	16.5 Deg.C	13.5 Volts	6 PTT's	16	37
1757521520	16.5 Deg.C	13.5 Volts	4 PTT's	16	7
1757519721	16.5 Deg.C	13.5 Volts	5 PTT's	15	37
1757517919	17 Deg.C	13.5 Volts	4 PTT's	15	7
1757516119	17 Deg.C	13.5 Volts	5 PTT's	14	37
1757514319	17 Deg.C	13.5 Volts	5 PTT's	14	7
1757512520	17 Deg.C	13.5 Volts	5 PTT's	13	37

*Used Equation Coefficients:

Temp: 0, 0.5, 0

Battery: 0, 0.1, 0

TX: 0, 1, 0

Value4: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)