IT9IFM-15 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IT9IFM-15. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Press*	Temp.in*	Hum*	eGAS*	Temp.out*
1789983372	1001.5 hPa	27.5 C deg	44.6 %	319 -	0 C deg
1789981520	1001.7 hPa	25.4 C deg	52.2 %	235 -	0 C deg
1789979693	1001.7 hPa	24.2 C deg	54.7 %	199 -	0 C deg
1789977863	1001.5 hPa	23.7 C deg	57.1 %	187 -	0 C deg
1789976031	1001.4 hPa	22.3 C deg	61.1 %	156 -	0 C deg
1789976031	1001.4 hPa	22.3 C deg	61.1 %	156 -	0 C deg
1789974202	1001.5 hPa	21.6 C deg	63.3 %	134 -	0 C deg
1789974202	1001.5 hPa	21.6 C deg	63.3 %	134 -	0 C deg
1789972385	1001.4 hPa	20.1 C deg	68.5 %	82 -	0 C deg
1789972385	1001.4 hPa	20.1 C deg	68.5 %	82 -	0 C deg
1789970541	1001.2 hPa	18.8 C deg	72.1 %	65 -	0 C deg
1789970541	1001.2 hPa	18.8 C deg	72.1 %	65 -	0 C deg
1789968709	1000.8 hPa	16 C deg	80.2 %	54 -	0 C deg
1789968709	1000.8 hPa	16 C deg	80.2 %	54 -	0 C deg
1789966887	1000.7 hPa	16.8 C deg	76.3 %	80 -	0 C deg
1789965061	1001.1 hPa	14.8 C deg	85.5 %	42 -	0 C deg
1789963227	1001 hPa	15.5 C deg	80.3 %	105 -	0 C deg
1789961389	1000.6 hPa	17 C deg	75.6 %	160 -	0 C deg
1789959561	1000.7 hPa	17.8 C deg	72.6 %	183 -	0 C deg
1789957752	1001.3 hPa	17 C deg	75.8 %	164 -	0 C deg
1789955898	1001.4 hPa	16.6 C deg	77.7 %	147 -	0 C deg
1789954070	1001.6 hPa	16.7 C deg	77.1 %	150 -	0 C deg
1789950416	1002.1 hPa	17.7 C deg	79.6 %	126 -	0 C deg
1789950416	1002.1 hPa	17.7 C deg	79.6 %	126 -	0 C deg
1789948591	1002.2 hPa	17.3 C deg	78.8 %	122 -	0 C deg

*Used Equation Coefficients:

Press: 0, 1, 0

Temp.in: 0, 1, 0

Hum: 0, 1, 0

eGAS: 0, 1, 0

Temp.out: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)