KE9CPD-FM Telemetry

This is the latest recevied telemetry packets stored in our database for station/object KE9CPD-FM. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	CPU Temp*	CPU Load*
1772548202	47 Deg.C	2 %
1772547605	48 Deg.C	2 %
1772546402	47 Deg.C	2 %
1772545808	48 Deg.C	2 %
1772544003	50 Deg.C	2 %
1772541002	47 Deg.C	2 %
1772538602	49 Deg.C	2 %
1772537408	48 Deg.C	2 %
1772536802	49 Deg.C	2 %
1772536208	48 Deg.C	2 %
1772535602	49 Deg.C	2 %
1772535008	50 Deg.C	2 %
1772534402	48 Deg.C	2 %
1772533802	48 Deg.C	2 %
1772533207	47 Deg.C	2 %
1772532602	47 Deg.C	2 %
1772532007	47 Deg.C	2 %
1772531401	47 Deg.C	2 %
1772530209	48 Deg.C	2 %
1772529602	47 Deg.C	2 %
1772529008	47 Deg.C	2 %
1772528402	47 Deg.C	2 %
1772527807	46 Deg.C	2 %
1772527202	47 Deg.C	2 %
1772526608	48 Deg.C	2 %

*Used Equation Coefficients:

CPU Temp: 0, 0.1, 0

CPU Load: 0, 1, 0

Value3: 0, 0, 0

Value4: 0, 0, 0

Value5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)