W0WRC-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object W0WRC-3. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RFIn*	RFiGate*	DigiRpt*	Temp*
1761641369	46 Pkts	45 Pkts	37 Pkts	31 C
1761639569	29 Pkts	26 Pkts	16 Pkts	31 C
1761637769	21 Pkts	21 Pkts	12 Pkts	31 C
1761635975	20 Pkts	19 Pkts	12 Pkts	31 C
1761634169	26 Pkts	25 Pkts	11 Pkts	31 C
1761632369	18 Pkts	18 Pkts	16 Pkts	31 C
1761630569	14 Pkts	14 Pkts	9 Pkts	31 C
1761628769	18 Pkts	18 Pkts	13 Pkts	31 C
1761626969	14 Pkts	13 Pkts	10 Pkts	31 C
1761625169	25 Pkts	24 Pkts	10 Pkts	31 C
1761623369	25 Pkts	24 Pkts	9 Pkts	31 C
1761621569	52 Pkts	49 Pkts	14 Pkts	32 C
1761619769	37 Pkts	37 Pkts	14 Pkts	31 C
1761617969	63 Pkts	63 Pkts	37 Pkts	32 C
1761616169	46 Pkts	45 Pkts	15 Pkts	32 C
1761614369	49 Pkts	47 Pkts	15 Pkts	32 C
1761612569	39 Pkts	39 Pkts	10 Pkts	32 C
1761610769	44 Pkts	43 Pkts	14 Pkts	32 C
1761608969	42 Pkts	40 Pkts	23 Pkts	32 C
1761607169	48 Pkts	46 Pkts	12 Pkts	32 C
1761605369	65 Pkts	62 Pkts	18 Pkts	32 C
1761603569	74 Pkts	73 Pkts	19 Pkts	32 C
1761601769	71 Pkts	70 Pkts	19 Pkts	32 C
1761599969	78 Pkts	76 Pkts	12 Pkts	32 C
1761598169	95 Pkts	93 Pkts	14 Pkts	32 C

*Used Equation Coefficients:

RFIn: 0, 1, 0

RFiGate: 0, 1, 0

DigiRpt: 0, 1, 0

InetiGate: 0, 1, 0

Temp: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)