EL-IW1AYD Telemetry

This is the latest recevied telemetry packets stored in our database for station/object EL-IW1AYD. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Value1*	Value2*	Value3*	Value4*
1761486910	0 RX Erlang	0.09 TX Erlang	0 RXcount/10m	20 TXcount/10m
1761486310	0 RX Erlang	0 TX Erlang	0 RXcount/10m	0 TXcount/10m
1761485110	0 RX Erlang	0 TX Erlang	0 RXcount/10m	0 TXcount/10m
1761483317	0 RX Erlang	0.01 TX Erlang	0 RXcount/10m	3 TXcount/10m
1761482710	0 RX Erlang	0.02 TX Erlang	0 RXcount/10m	10 TXcount/10m
1761482110	0 RX Erlang	0.01 TX Erlang	0 RXcount/10m	5 TXcount/10m
1761481510	0 RX Erlang	0.01 TX Erlang	0 RXcount/10m	3 TXcount/10m
1761480310	0 RX Erlang	0 TX Erlang	0 RXcount/10m	0 TXcount/10m
1761478510	0 RX Erlang	0 TX Erlang	0 RXcount/10m	1 TXcount/10m
1761477910	0 RX Erlang	0.05 TX Erlang	0 RXcount/10m	16 TXcount/10m
1761475510	0 RX Erlang	0.93 TX Erlang	0 RXcount/10m	11 TXcount/10m
1761474910	0 RX Erlang	0.9 TX Erlang	0 RXcount/10m	14 TXcount/10m
1761474310	0 RX Erlang	0.06 TX Erlang	0 RXcount/10m	20 TXcount/10m
1761472510	0 RX Erlang	0.45 TX Erlang	0 RXcount/10m	29 TXcount/10m
1761471310	0 RX Erlang	0.04 TX Erlang	0 RXcount/10m	9 TXcount/10m
1761470710	0.01 RX Erlang	0.43 TX Erlang	2 RXcount/10m	20 TXcount/10m
1761470117	0 RX Erlang	0.01 TX Erlang	0 RXcount/10m	12 TXcount/10m
1761469510	0 RX Erlang	0.32 TX Erlang	0 RXcount/10m	24 TXcount/10m
1761468910	0 RX Erlang	0.29 TX Erlang	0 RXcount/10m	27 TXcount/10m
1761467710	0 RX Erlang	0.55 TX Erlang	0 RXcount/10m	16 TXcount/10m
1761466510	0 RX Erlang	0 TX Erlang	0 RXcount/10m	0 TXcount/10m
1761465910	0 RX Erlang	0.04 TX Erlang	0 RXcount/10m	13 TXcount/10m
1761465310	0 RX Erlang	0.48 TX Erlang	0 RXcount/10m	21 TXcount/10m
1761464710	0 RX Erlang	0.24 TX Erlang	0 RXcount/10m	24 TXcount/10m
1761464110	0 RX Erlang	0.53 TX Erlang	0 RXcount/10m	22 TXcount/10m

*Used Equation Coefficients:

Value1: 0, 1, 0

Value2: 0, 1, 0

Value3: 0, 1, 0

Value4: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)