OK4JL-11 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object OK4JL-11. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Battery*	Satellite*
1762358068	37.84 V	17
1762357945	37.8 V	16
1762357885	37.79 V	16
1762357825	37.79 V	14
1762357765	37.74 V	14
1762357705	37.73 V	15
1762357645	37.72 V	16
1762357585	37.71 V	17
1762357525	37.68 V	17
1762357465	37.65 V	16
1762357405	37.65 V	17
1762357345	37.59 V	17
1762357285	37.62 V	16
1762357225	37.58 V	16
1762357165	37.57 V	17
1762357105	37.56 V	18
1762357044	37.53 V	18
1762356984	37.52 V	18
1762356924	37.44 V	17
1762356864	37.47 V	17
1762356804	37.46 V	17
1762356744	37.44 V	17
1762356624	37.4 V	17
1762356564	37.38 V	17
1762356504	37.35 V	17

*Used Equation Coefficients:

Battery: 0, 0.01, 0

Satellite: 0, 1, 0

Value3: 0, 1, 0

Value4: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)