DL1PPA-9 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DL1PPA-9. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Press*	Temp.in*	Hum*	eGAS*	Temp.out*
1765624055	1018.3 hPa	6.1 C deg	84.6 %	71 -	0 C deg
1765622245	1018.5 hPa	6.1 C deg	84.4 %	70 -	0 C deg
1765620437	1018.4 hPa	6 C deg	84.1 %	70 -	0 C deg
1765618626	1018.1 hPa	5.9 C deg	84.4 %	70 -	0 C deg
1765615008	1017.7 hPa	5.8 C deg	83.9 %	71 -	0 C deg
1765613200	1017.4 hPa	5.8 C deg	83.7 %	71 -	0 C deg
1765611389	1017.3 hPa	5.6 C deg	84.1 %	71 -	0 C deg
1765609582	1017 hPa	5.7 C deg	83.9 %	71 -	0 C deg
1765607771	1016.7 hPa	5.5 C deg	84.1 %	71 -	0 C deg
1765605963	1016.4 hPa	5.7 C deg	83.6 %	71 -	0 C deg
1765604153	1016.3 hPa	5.7 C deg	83.5 %	70 -	0 C deg
1765602345	1016.3 hPa	5.7 C deg	83.5 %	70 -	0 C deg
1765600538	1016.3 hPa	5.7 C deg	83.6 %	69 -	0 C deg
1765598726	1016.3 hPa	5.7 C deg	84.2 %	68 -	0 C deg
1765596916	1016.3 hPa	5.9 C deg	83.3 %	68 -	0 C deg
1765593755	1016.3 hPa	5.8 C deg	83.3 %	67 -	0 C deg
1765591944	1016.2 hPa	5.8 C deg	83.3 %	67 -	0 C deg
1765590136	1016 hPa	5.8 C deg	83.2 %	67 -	0 C deg
1765588326	1015.5 hPa	5.7 C deg	83.1 %	67 -	0 C deg
1765586518	1015.4 hPa	5.7 C deg	83.1 %	67 -	0 C deg
1765584708	1015.2 hPa	5.7 C deg	82.9 %	66 -	0 C deg
1765582900	1015.1 hPa	5.6 C deg	83.1 %	67 -	0 C deg
1765581089	1015 hPa	5.6 C deg	83 %	66 -	0 C deg
1765579290	1014.8 hPa	5.6 C deg	82.8 %	66 -	0 C deg
1765577471	1014.5 hPa	5.5 C deg	82.6 %	66 -	0 C deg

*Used Equation Coefficients:

Press: 0, 1, 0

Temp.in: 0, 1, 0

Hum: 0, 1, 0

eGAS: 0, 1, 0

Temp.out: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)