EA5KAO-9 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object EA5KAO-9. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Voltage*	Celsius*	Rel_Hum*	Atm_Press*
1777186131	3.84 VDC	28.2 C	40.07 %	1020.13 hPa
1777184574	4.03 VDC	32.2 C	36.85 %	1019.38 hPa
1777183982	3.98 VDC	31.3 C	48.48 %	1019.25 hPa
1777183949	3.98 VDC	31.3 C	48.48 %	1019.5 hPa
1777183885	3.97 VDC	30.7 C	47.53 %	1018.25 hPa
1777183688	3.96 VDC	30.2 C	45.45 %	1016.75 hPa
1777183580	3.95 VDC	30 C	46.16 %	1019 hPa
1777183565	3.95 VDC	29.7 C	46.3 %	1018 hPa
1777183535	3.95 VDC	29.7 C	46.3 %	1018.75 hPa
1777183418	3.94 VDC	29.1 C	46.04 %	1020.5 hPa
1777183403	3.94 VDC	29.1 C	46.04 %	1019.38 hPa
1777183388	3.94 VDC	28.8 C	47.71 %	1010.5 hPa
1777183373	3.94 VDC	28.8 C	47.71 %	1012.75 hPa
1777183248	3.93 VDC	28.1 C	48.68 %	1019.38 hPa
1777183233	3.93 VDC	28.1 C	48.68 %	1020.13 hPa
1777183208	3.93 VDC	27.6 C	53.91 %	1022 hPa
1777183198	3.93 VDC	27.6 C	53.91 %	1021 hPa
1777183183	3.93 VDC	27.6 C	53.91 %	1020 hPa
1777182638	3.73 VDC	23.5 C	59.81 %	1019.5 hPa
1777182601	3.7 VDC	23 C	57.14 %	1020.38 hPa
1777182586	3.69 VDC	23 C	57.14 %	1019.63 hPa
1777182536	3.65 VDC	22.4 C	57.6 %	1009.25 hPa
1776478833	3.36 VDC	25.5 C	43.94 %	1021.25 hPa
1776477930	3.54 VDC	25.5 C	44.33 %	1021.13 hPa
1776477025	3.64 VDC	25.5 C	44.37 %	1020.38 hPa

*Used Equation Coefficients:

Voltage: 0, 0.01, 0

Celsius: 0, 0.1, -50

Rel_Hum: 0, 0.01, 0

Atm_Press: 0, 0.125, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)