IT9IRS-12 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IT9IRS-12. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	TX*	RX*
1757830977	91 Count	146 Count
1757830854	90 Count	146 Count
1757823272	85 Count	146 Count
1757823149	84 Count	143 Count
1757823026	83 Count	140 Count
1757822903	82 Count	138 Count
1757822780	81 Count	135 Count
1757822657	80 Count	133 Count
1757822534	79 Count	130 Count
1757822411	78 Count	129 Count
1757822288	77 Count	126 Count
1757822164	76 Count	124 Count
1757822041	75 Count	124 Count
1757821918	74 Count	123 Count
1757821795	73 Count	122 Count
1757821672	72 Count	122 Count
1757821549	71 Count	120 Count
1757821426	70 Count	119 Count
1757821319	69 Count	116 Count
1757821180	68 Count	115 Count
1757820934	66 Count	114 Count
1757820811	65 Count	112 Count
1757820687	64 Count	110 Count
1757820565	63 Count	110 Count
1757820441	62 Count	109 Count

*Used Equation Coefficients:

TX: 0, 1, 0

RX: 0, 1, 0

Digi: 0, 1, 0

V_Bat: 0, 0.01, 0

V_Ext: 0, 0.02, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)