LY7OK-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object LY7OK-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1788623148	14.18 Volt	30 Pkt	20 Pkt	87 Pcnt
1788623147	14.18 Volt	30 Pkt	20 Pkt	87 Pcnt
1788622548	14.18 Volt	40 Pkt	20 Pkt	89 Pcnt
1788621948	14.18 Volt	40 Pkt	20 Pkt	89 Pcnt
1788621348	14.18 Volt	40 Pkt	20 Pkt	86 Pcnt
1788620748	14.18 Volt	30 Pkt	10 Pkt	84 Pcnt
1788620148	14.18 Volt	40 Pkt	20 Pkt	88 Pcnt
1788619549	14.18 Volt	20 Pkt	10 Pkt	85 Pcnt
1788619548	14.18 Volt	20 Pkt	10 Pkt	85 Pcnt
1788618948	14.18 Volt	30 Pkt	10 Pkt	88 Pcnt
1788618348	14.18 Volt	40 Pkt	20 Pkt	93 Pcnt
1788617748	14.18 Volt	40 Pkt	20 Pkt	95 Pcnt
1788617148	14.18 Volt	40 Pkt	20 Pkt	97 Pcnt
1788616548	14.18 Volt	40 Pkt	20 Pkt	92 Pcnt
1788615949	14.18 Volt	30 Pkt	20 Pkt	88 Pcnt
1788615948	14.18 Volt	30 Pkt	20 Pkt	88 Pcnt
1788615348	14.18 Volt	40 Pkt	20 Pkt	90 Pcnt
1788614748	14.18 Volt	40 Pkt	20 Pkt	88 Pcnt
1788614148	14.18 Volt	40 Pkt	20 Pkt	88 Pcnt
1788613548	14.18 Volt	40 Pkt	20 Pkt	88 Pcnt
1788612948	14.18 Volt	40 Pkt	20 Pkt	95 Pcnt
1788612349	14.18 Volt	30 Pkt	20 Pkt	95 Pcnt
1788612348	14.18 Volt	30 Pkt	20 Pkt	95 Pcnt
1788611748	14.18 Volt	40 Pkt	20 Pkt	96 Pcnt
1788611148	14.18 Volt	40 Pkt	20 Pkt	96 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

-: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)