MB7UGB-0 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object MB7UGB-0. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RFIn*	RFiGate*	Temp*
1777683121	4 Pkts	3 Pkts	19 C
1777679521	4 Pkts	4 Pkts	20 C
1777675921	4 Pkts	4 Pkts	19 C
1777672321	3 Pkts	3 Pkts	19 C
1777668721	4 Pkts	4 Pkts	20 C
1777665121	2 Pkts	2 Pkts	20 C
1777661521	4 Pkts	4 Pkts	20 C
1777657921	4 Pkts	4 Pkts	20 C
1777654321	3 Pkts	3 Pkts	20 C
1777650721	1 Pkts	1 Pkts	20 C
1777647121	1 Pkts	1 Pkts	20 C
1777643521	3 Pkts	3 Pkts	20 C
1777639921	37 Pkts	34 Pkts	20 C
1777636321	230 Pkts	207 Pkts	19 C
1777632721	152 Pkts	130 Pkts	19 C
1777629121	182 Pkts	159 Pkts	19 C
1777625521	192 Pkts	171 Pkts	19 C
1777621921	206 Pkts	188 Pkts	19 C
1777618321	241 Pkts	224 Pkts	19 C
1777614721	233 Pkts	219 Pkts	19 C
1777611121	264 Pkts	243 Pkts	19 C
1777607521	239 Pkts	216 Pkts	19 C
1777603921	221 Pkts	198 Pkts	19 C
1777600321	247 Pkts	224 Pkts	19 C
1777596721	258 Pkts	235 Pkts	19 C

*Used Equation Coefficients:

RFIn: 0, 1, 0

RFiGate: 0, 1, 0

Temp: 0, 1, 0

V1: 0, 0.1, 0

Value5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)