OE3XWJ-93 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object OE3XWJ-93. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	60 Wasserstand*	65 Wassertemperatur*	50 Batteriespannung*	Value4*
1776677159	183.6 cm	12.5 °C	13.9 V	13 dB
1776676570	183 cm	12.4 °C	13.9 V	13 dB
1776675346	182.5 cm	12.3 °C	13.9 V	13 dB
1776674812	182.6 cm	12.2 °C	13.9 V	13 dB
1776674172	182.7 cm	12.1 °C	13.9 V	13 dB
1776673856	182.6 cm	12.1 °C	13.9 V	13 dB
1776672361	182.7 cm	11.9 °C	13.9 V	13 dB
1776672052	182.7 cm	11.8 °C	13.9 V	13 dB
1776671811	182.7 cm	11.8 °C	13.9 V	13 dB
1776671461	182.7 cm	11.7 °C	13.9 V	13 dB
1776671152	182.8 cm	11.7 °C	13.9 V	13 dB
1776670255	182.8 cm	11.6 °C	13.9 V	13 dB
1776669947	182.7 cm	11.6 °C	13.9 V	13 dB
1776669361	182.9 cm	11.5 °C	13.9 V	13 dB
1776668450	183.1 cm	11.4 °C	13.9 V	13 dB
1776668147	183.2 cm	11.4 °C	13.9 V	13 dB
1776667564	183.3 cm	11.3 °C	13.9 V	13 dB
1776666644	183.7 cm	11.3 °C	13.9 V	13 dB
1776666346	183.7 cm	11.3 °C	13.9 V	13 dB
1776666058	183.9 cm	11.2 °C	13.9 V	13 dB
1776665809	184 cm	11.2 °C	13.9 V	13 dB
1776665167	184.2 cm	11.2 °C	13.9 V	13 dB
1776664554	184.1 cm	11.1 °C	13.9 V	12 dB
1776664267	184 cm	11.1 °C	13.9 V	12 dB
1776663653	183.8 cm	11.1 °C	13.9 V	12 dB

*Used Equation Coefficients:

60 Wasserstand: 0, 1, 0

65 Wassertemperatur: 0, 1, 0

50 Batteriespannung: 0, 1, 0

Value4: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)