ER-OE9XKV Telemetry

This is the latest recevied telemetry packets stored in our database for station/object ER-OE9XKV. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Value1*	Value2*	Value3*	Value4*
1773252002	0 RX Erlang	0 TX Erlang	0 RXcount/10m	1 TXcount/10m
1773251402	0 RX Erlang	0 TX Erlang	0 RXcount/10m	0 TXcount/10m
1773250802	0 RX Erlang	0.01 TX Erlang	0 RXcount/10m	1 TXcount/10m
1773250202	0 RX Erlang	0 TX Erlang	0 RXcount/10m	1 TXcount/10m
1773249602	0 RX Erlang	0 TX Erlang	0 RXcount/10m	0 TXcount/10m
1773249002	0 RX Erlang	0.01 TX Erlang	1 RXcount/10m	2 TXcount/10m
1773248402	0 RX Erlang	0 TX Erlang	0 RXcount/10m	1 TXcount/10m
1773247802	0 RX Erlang	0 TX Erlang	0 RXcount/10m	0 TXcount/10m
1773247202	0 RX Erlang	0.01 TX Erlang	0 RXcount/10m	1 TXcount/10m
1773246602	0 RX Erlang	0 TX Erlang	0 RXcount/10m	1 TXcount/10m
1773246003	0 RX Erlang	0 TX Erlang	0 RXcount/10m	0 TXcount/10m
1773245402	0 RX Erlang	0.01 TX Erlang	0 RXcount/10m	1 TXcount/10m
1773244802	0 RX Erlang	0 TX Erlang	0 RXcount/10m	1 TXcount/10m
1773244202	0.35 RX Erlang	0.62 TX Erlang	18 RXcount/10m	27 TXcount/10m
1773243602	0.37 RX Erlang	0.59 TX Erlang	25 RXcount/10m	32 TXcount/10m
1773243002	0.03 RX Erlang	0.09 TX Erlang	4 RXcount/10m	8 TXcount/10m
1773242408	0 RX Erlang	0 TX Erlang	0 RXcount/10m	0 TXcount/10m
1773241802	0 RX Erlang	0.01 TX Erlang	0 RXcount/10m	1 TXcount/10m
1773241202	0.35 RX Erlang	0.38 TX Erlang	12 RXcount/10m	11 TXcount/10m
1773240602	0.01 RX Erlang	0.01 TX Erlang	2 RXcount/10m	2 TXcount/10m
1773240002	0.01 RX Erlang	0.02 TX Erlang	3 RXcount/10m	4 TXcount/10m
1773239402	0 RX Erlang	0 TX Erlang	0 RXcount/10m	1 TXcount/10m
1773238802	0 RX Erlang	0 TX Erlang	0 RXcount/10m	0 TXcount/10m
1773238202	0 RX Erlang	0.01 TX Erlang	0 RXcount/10m	1 TXcount/10m
1773237602	0 RX Erlang	0 TX Erlang	0 RXcount/10m	1 TXcount/10m

*Used Equation Coefficients:

Value1: 0, 1, 0

Value2: 0, 1, 0

Value3: 0, 1, 0

Value4: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)