8P6FB-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object 8P6FB-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*	A5*
1777589226	12.38 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1777587126	12.38 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1777585026	12.38 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1777580826	12.38 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1777578726	12.38 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1777576626	12.38 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1777574526	12.38 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1777572426	12.38 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1777570326	12.38 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1777568226	12.38 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1777566126	12.38 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1777564026	12.38 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1777561926	12.38 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1777559826	12.38 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1777557726	12.38 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1777555626	12.38 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1777553526	12.38 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1777551426	12.38 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1777549327	12.38 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1777547227	12.38 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1777545127	12.38 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1777543027	12.38 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1777540927	12.38 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1777538827	12.38 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1777536727	12.38 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)