EA8EE-6 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object EA8EE-6. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	TEMP*	HUM*	BAR*	BAT*	SAT*
1780330832	33.15 °C	37.3 %RH	828 hPa	4.16 V	6
1780330805	33.13 °C	37.3 %RH	828 hPa	4.16 V	5
1780330790	33.11 °C	37.2 %RH	828 hPa	4.16 V	5
1780330769	33.11 °C	37.3 %RH	828 hPa	4.16 V	5
1780330735	33.09 °C	37.3 %RH	828 hPa	4.16 V	5
1780330701	33.06 °C	37.3 %RH	828 hPa	4.16 V	5
1780330687	33.06 °C	37.3 %RH	828 hPa	4.16 V	5
1780330675	33.04 °C	37.3 %RH	828 hPa	4.15 V	5
1780330645	33.04 °C	37.3 %RH	828 hPa	4.15 V	5
1780325211	33.18 °C	37 %RH	828 hPa	4.16 V	6
1780324755	32.95 °C	37.3 %RH	828 hPa	4.15 V	5
1780312129	32.58 °C	37 %RH	828 hPa	4.16 V	5
1780262100	32.97 °C	37.9 %RH	828 hPa	4.17 V	6
1780262030	32.86 °C	38.1 %RH	828 hPa	4.17 V	6
1780118120	32.34 °C	39 %RH	828 hPa	4.15 V	6
1780038119	31.56 °C	38.1 %RH	828 hPa	4.16 V	4
1780038098	31.55 °C	38.1 %RH	828 hPa	4.16 V	5
1780027525	31.13 °C	36.8 %RH	828 hPa	4.16 V	5
1780020243	31.67 °C	37 %RH	828 hPa	4.16 V	5
1779998528	32.38 °C	36.9 %RH	828 hPa	4.17 V	8
1779994894	32.63 °C	36.9 %RH	828 hPa	4.17 V	7
1779994771	32.65 °C	37 %RH	828 hPa	4.17 V	7
1779993448	32.86 °C	37.6 %RH	828 hPa	4.17 V	6
1779993405	32.86 °C	37.7 %RH	828 hPa	4.18 V	6
1779993350	32.86 °C	37.6 %RH	828 hPa	4.17 V	6

*Used Equation Coefficients:

TEMP: 0, 0.01, 0

HUM: 0, 0.1, 0

BAR: 0, 0.1, 0

BAT: 0, 0.01, 0

SAT: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)