TA7GUL-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object TA7GUL-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	TxTraffic*	RSSI*	Voltage*
1761583714	69 Pkt	11 Pkt	-68 dBm	0.06 V
1761580083	69 Pkt	19 Pkt	-70 dBm	0.06 V
1761576465	24 Pkt	12 Pkt	-67 dBm	0.06 V
1761572830	19 Pkt	0 Pkt	-68 dBm	0.06 V
1761569206	16 Pkt	0 Pkt	-67 dBm	0.06 V
1761565583	10 Pkt	0 Pkt	-68 dBm	0.06 V
1761561959	16 Pkt	0 Pkt	-72 dBm	0.06 V
1761558334	13 Pkt	0 Pkt	-69 dBm	0.06 V
1761554711	11 Pkt	0 Pkt	-67 dBm	0.06 V
1761551088	10 Pkt	0 Pkt	-69 dBm	0.06 V
1761547466	53 Pkt	0 Pkt	-69 dBm	0.06 V
1761543842	56 Pkt	0 Pkt	-69 dBm	0.06 V
1761540215	25 Pkt	0 Pkt	-70 dBm	0.06 V
1761536590	9 Pkt	0 Pkt	-67 dBm	0.06 V
1761532968	0 Pkt	0 Pkt	-64 dBm	0.06 V
1761500874	55 Pkt	0 Pkt	-65 dBm	0.06 V
1761497250	63 Pkt	0 Pkt	-65 dBm	0.06 V
1761493623	55 Pkt	0 Pkt	-65 dBm	0.06 V
1761482751	11 Pkt	0 Pkt	-66 dBm	0.06 V
1761475505	9 Pkt	0 Pkt	-65 dBm	0.06 V
1761471883	15 Pkt	6 Pkt	-64 dBm	0.06 V
1761468259	8 Pkt	5 Pkt	-64 dBm	0.06 V
1761464635	14 Pkt	6 Pkt	-64 dBm	0.06 V
1761461012	17 Pkt	0 Pkt	-65 dBm	0.06 V
1761457389	12 Pkt	0 Pkt	-68 dBm	0.06 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)