EL-XQ5OS Telemetry

This is the latest recevied telemetry packets stored in our database for station/object EL-XQ5OS. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Value1*	Value2*	Value3*	Value4*
1784721617	0 RX Erlang	0.25 TX Erlang	0 RXcount/10m	12 TXcount/10m
1784721017	0 RX Erlang	0.72 TX Erlang	0 RXcount/10m	15 TXcount/10m
1784720417	0 RX Erlang	0.95 TX Erlang	0 RXcount/10m	10 TXcount/10m
1784719817	0 RX Erlang	0.51 TX Erlang	0 RXcount/10m	14 TXcount/10m
1784719217	0 RX Erlang	0.93 TX Erlang	0 RXcount/10m	8 TXcount/10m
1784718617	0 RX Erlang	0.79 TX Erlang	0 RXcount/10m	27 TXcount/10m
1784718017	0 RX Erlang	0.6 TX Erlang	0 RXcount/10m	19 TXcount/10m
1784717417	0 RX Erlang	0.32 TX Erlang	0 RXcount/10m	18 TXcount/10m
1784716817	0 RX Erlang	0.69 TX Erlang	0 RXcount/10m	16 TXcount/10m
1784716217	0 RX Erlang	0.22 TX Erlang	0 RXcount/10m	12 TXcount/10m
1784715617	0 RX Erlang	0.05 TX Erlang	0 RXcount/10m	5 TXcount/10m
1784715006	0 RX Erlang	0.01 TX Erlang	0 RXcount/10m	2 TXcount/10m
1784714407	0 RX Erlang	0.01 TX Erlang	0 RXcount/10m	2 TXcount/10m
1784713807	0 RX Erlang	0.01 TX Erlang	0 RXcount/10m	1 TXcount/10m
1784713207	0 RX Erlang	0.02 TX Erlang	0 RXcount/10m	1 TXcount/10m
1784712607	0 RX Erlang	0.01 TX Erlang	0 RXcount/10m	1 TXcount/10m
1784712007	0 RX Erlang	0.01 TX Erlang	0 RXcount/10m	1 TXcount/10m
1784711407	0 RX Erlang	0.02 TX Erlang	0 RXcount/10m	3 TXcount/10m
1784710807	0 RX Erlang	0.01 TX Erlang	0 RXcount/10m	1 TXcount/10m
1784710206	0 RX Erlang	0.01 TX Erlang	0 RXcount/10m	1 TXcount/10m
1784709607	0 RX Erlang	0.02 TX Erlang	0 RXcount/10m	1 TXcount/10m
1784709007	0 RX Erlang	0.01 TX Erlang	0 RXcount/10m	1 TXcount/10m
1784708407	0 RX Erlang	0.01 TX Erlang	0 RXcount/10m	1 TXcount/10m
1784707807	0 RX Erlang	0.01 TX Erlang	0 RXcount/10m	2 TXcount/10m
1784707207	0 RX Erlang	0.01 TX Erlang	0 RXcount/10m	1 TXcount/10m

*Used Equation Coefficients:

Value1: 0, 1, 0

Value2: 0, 1, 0

Value3: 0, 1, 0

Value4: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)