DL2BWO-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DL2BWO-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Press*	Temp.in*	Hum*	QNH*	Temp.out*
1765174997	1000.2 hPa	23.3 C deg	40.7 %	1008.5 hPa	0 C deg
1765173183	999.7 hPa	25.4 C deg	40.9 %	1008 hPa	0 C deg
1765169552	999.2 hPa	25.4 C deg	41 %	1007.4 hPa	0 C deg
1765167740	999 hPa	25.5 C deg	40.8 %	1007.2 hPa	0 C deg
1765165926	998.7 hPa	25.4 C deg	41 %	1007 hPa	0 C deg
1765164108	998.8 hPa	25.4 C deg	41 %	1007 hPa	0 C deg
1765162293	998.8 hPa	25.5 C deg	41 %	1007 hPa	0 C deg
1765160478	999 hPa	25.5 C deg	40.9 %	1007.2 hPa	0 C deg
1765158666	999.4 hPa	25.6 C deg	40.8 %	1007.6 hPa	0 C deg
1765156859	999.5 hPa	25.7 C deg	40.7 %	1007.8 hPa	0 C deg
1765155036	999.5 hPa	25.6 C deg	40.7 %	1007.8 hPa	0 C deg
1765153221	999.8 hPa	25.7 C deg	40.5 %	1008 hPa	0 C deg
1765151406	1000.1 hPa	25.6 C deg	40.6 %	1008.4 hPa	0 C deg
1765149592	1000.3 hPa	25.6 C deg	40.5 %	1008.5 hPa	0 C deg
1765147775	1000.6 hPa	25.7 C deg	40.3 %	1008.8 hPa	0 C deg
1765145960	1000.9 hPa	25.7 C deg	40.2 %	1009.2 hPa	0 C deg
1765144144	1001.1 hPa	25.8 C deg	39.9 %	1009.4 hPa	0 C deg
1765142328	1001.2 hPa	25.7 C deg	39.9 %	1009.4 hPa	0 C deg
1765138700	1001.7 hPa	26 C deg	43.9 %	1010 hPa	0 C deg
1765136885	1002 hPa	26 C deg	42.8 %	1010.2 hPa	0 C deg
1765135070	1002.3 hPa	25.8 C deg	40.3 %	1010.5 hPa	0 C deg
1765133252	1002.4 hPa	26.1 C deg	40.8 %	1010.7 hPa	0 C deg
1765131437	1002.3 hPa	26.1 C deg	40.6 %	1010.6 hPa	0 C deg
1765129622	1002.4 hPa	26 C deg	39.9 %	1010.7 hPa	0 C deg
1765127807	1002.4 hPa	25.3 C deg	38.6 %	1010.7 hPa	0 C deg

*Used Equation Coefficients:

Press: 0, 1, 0

Temp.in: 0, 1, 0

Hum: 0, 1, 0

QNH: 0, 1, 0

Temp.out: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)